The Ultrasonic Wall Thickness Gauge TI-25M is designed to measure accurately the thickness of walls and the extent of corrosion of metals, ceramics, glass and the most rigid plastics from only one side!
You can use the TI-25M in different modes, either in a Single Thickness Reading mode or in a Scan mode. In the Scan mode, the probe has to be dragged over a large measuring area. Finally the minimum thickness reading measured during the “Scan” process will be displayed.
The TI-25M provides therefore an operation without any trouble even under tough field conditions.probe is also waterproof and can thus be submerged in water. Additionally, our gauge is impact-resistant, environmentally sealed and
The TI-25M is supplied as a complete kit with:
all in a foam-fitted carrying case.
|Minimum Radius for Convex Surfaces||8.89 mm|
|Minimum Radius for Concave Surfaces||76.2 mm|
|Minimum Headroom||25.4 mm|
|Minimum Sample Diameter||3.8 mm|
|Minimum Substrate Thickness - F||NA|
|Minimum Substrate Thickness - NFe||NA|
|Range in Steel||0.60-150.0 mm (0.025-6.00")|
|Resolution||0.01 mm (.001")|
|Display||4½ - Digit, 0.5" Backlit LCD|
|Velocity Range||2000-10,000 m/sec. (6,500-33,000 ft./sec)|
|Probe||7.5 MHz, 6.35 mm Diameter (0.25")|
|Cable||1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.)|
|Temp. Limits||Ambient: -30 to 50° C (-20 to 120° F)|
Material: -0 to 200° F (-20 to 100° C)
Special high temperature probes are optionally available.
|Battery Type||Two AA batteries|
|Battery Life||200 hours|
|Weight||196 g (7 ounces)|
|Size||64 x 114 x 32 mm|
(2.5 x 4.5 x 1.25")
|Warranty||Gauge: 5 Years|
Probes: 90 Days
|Accessories Included||Accessories Included|
|TI-25M-H||High Temperature for surfaces up to 650° F or 343° Celsius|
|TI-25M-107||Cast Iron / Plastics|
|TI-25M-HW||Heavy Wall (1.27-508mm)|