We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

DS-2000LED LED Stroboscope

Made in GermanyMeasuring Range: 30 - 300,000 FPM (5000 Hz, max)
Flash Brightness: 3000 Lux (@ 6000 FPM)

Designed for maximum performance, portability and ease of use, the DS-2000LED is a hand-held battery powered LED Digital Stroboscope for use in speed measurement as well as for motion analysis. It is fitted with seven (7) state-of-the-art, super-bright LEDs mounted in a precision-machined aluminum head with optimized optics, providing the highest light output of similar strobes on the market.

The DS-2000LED can operate even at the highest flash rates for up to six hours continuously on a single set of three (3) standard AA-batteries . Keypad controls adjust flash rate in single increments as well as special keys for 2X and ÷2 functions. Other user-programmable settings include flash duration, phase shift, delay and much more.

Supplied in a high-impact plastic with rubber protective sleeve providing additional protection as well as improved grip for the operator. Lifetime LEDs do not wear-out or need replacement making this product ideal for use on the factory floor, in the field or in the laboratory. Applications include ideal for speed, motion and vibration analysis, on rotating shafts, fans, cams, hi-speed motion analysis for speakers or ink-jet printing and more.

  • Lifetime LEDs do not wear-out or need replacement
  • Produces the brightest flash and sharpest image over the entire range to
  • Market-leading 3000 Lux brightness (measured at 6000 fpm at a distance of 20 cm)
  • NIST-Traceable Calibration Certificate provided
  • Three (3) AA-Batteries provide six hours of continuous use operation
  • External Trigger Input/Output is optionally available. Specify model DS-2000LED-OT
  • User-selected units of Hz or FPM (Flashes Per Minute)
  • 2-Year warranty

Light Output (LUX) vs Distance
Light Output (LUX) vs Distance
at 20 cm Distance, 6000 flashes/min (FPM)


Complete Kit

DS-2000LED Strobe is supplied in a foam-fitted carrying case with 2 sets of 3x-AA batteries (6 batteries total), Traceable Calibration Certificate and Operating Instruction Manual.

DS-2000LED-OT Strobe also includes a connector for external trigger signal and 3 meter/10ft. trigger cable.


Li-Ion Rechargeable AA Batteries via the USB to USB-C

  • Li-Ion rechargeable battery
  • Stable voltage of 1,5 V over 95% of the runtime
  • Charged via the USB to USB-C cable

More details

Li-Ion Rechargeable AA Batteries via the USB to USB-C 127554


Frequency Range30 - 300,000 FPM
Flash DurationAdjustable (1 usec up to 8522 usec)
Accuracy0.045% (+/- 1 digit) or better
Resolution± 0.1 FPM (30 - 999) ± 1 FPM 1000+
Brightness3000 Lux @ 6000 FPM / 20cm (7.9 inch)
Protection ClassIP65 (Protection from Dust and Water Jets)
DisplayLCD, multiple lines
CertificationCE (as per EU norms)
Flash ColorApprox. 6.500 K
Power Supply3x AA size batteries or 3x NiMH rechargeable batteries
Housing MaterialAluminum / ABS Heavy duty design
Dimensions191 x 82 x 60 mm / 7.5 x 3.2 x 2.4 inch
Weight Approx400g (including batteries)
Temperature Range0° - 45° C / 32° - 113° F
Battery LifeNiMH: approx 11h at 6.000 FPM
Disposable: approx 6 h at 6.000 FPM
Warranty2 Years
Trigger InputPrinciple: Optocoupler, voltage-free
PrincipleOptocoupler, voltage-free
Low Level< 1 V
Level3 - 32 V, NPN + PNP
Trigger OutputPrinciple: Short-circuit and overvoltage proff transistor output to the optocoupler control, non-isolated
PrincipleShort-circuit and overvoltage proff transistor output to the optocoupler control, non-isolated
Level max.NPR, max 32V
Pulse LengthAdjustable
Maximum current50mA
Reverse voltage protectionYes

Buy Now

DS-2000LED Digital LED Stroboscope
€ 625,00 
DS-2000LED-OT LED Stroboscope with TTL Output
€ 790,00 

Li-Ion Rechargeable AA Batteries - 4 pcs (with USB to USB-C cable)
€ 25,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.