We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

Cable Tension Meter / Wire Rope Tension Gauge


Cable tension measurement

Cable tension meters are used wherever a uniform tension distribution is necessary, safety-relevant minimum tensile stresses must be observed or breaking loads of ropes must not be exceeded.

Cable tension meters can carry out measurements in open and closed static force systems without having to disconnect them. The force is measured directly in the force system; the cable tension meter is clamped onto the cable by means of a clamping mechanism, so that the sensor roller exerts permanent pressure on the cable.

Cable tension meter calibration

Cables have different characteristics based on their material, diameter and structure. Calibration of the wire rope tension gauges on the cables to be tested is therefore necessary for an accurate cable tension measurement. Other parameters, such as the rope length and material, also influence the measurement.

Please contact us for an individual consultation if required. We are happy to assist you.



RTM-E Digital Cable Tension Meter

RTM 20D
  • High Capacity Portable Cable Tension Meter
  • Range:
    30,000 kg (300kN / 66,000lb)
  • Accuracy:
    2-6% of instrument capacity
  • Cable Thickness:
    6 - 38 mm (0.25 - 1.5 inch)
  • Especially developped for guy wires, support cables, ski lifts etc.
Price from € 9.034,00
More information

CTM2 Portable Wire Rope Tension Meter

CTM2
  • Portable Cable Tension Meter
  • 2 Ranges:
    1,000 kg (10kN / 2,000lb)
    4,500 kg (45kN / 10,000lb)
  • Accuracy:
    ± 3% of instrument capacity
  • Cable Thickness:
    4.75 - 25 mm (3/16 - 1 inch)
Price from € 3.245,00
More information

CTM2-T Cell Tower Shunt Meter

CTM2-T
  • Portable Cell Tower Cable Tension Meter
  • Range:
    4,500 kg (45kN / 10,000lb)
  • Accuracy:
    ± 3% of instrument capacity
  • Cable Thickness:
    4.75 - 25 mm (3/16 - 1 inch)
Price from € 3.130,00
More information

CBM Cable Tension Meter

CBM
  • Portable Cable Tension Meter
  • 13 Ranges:
    up to 300kN
  • Accuracy:
    max. ± 1% of instrument capacity
  • Cable Thickness:
    1 - 46mm
  • Especially for open and also for closed force cable systems

136-3 Heavy Duty Tension Meter

136-3
  • Heavy Duty model
  • 12 Ranges:
    5kg up to 1000kg
  • Accuracy:
    ± 1.5% Full Scale or better
  • Cable Thickness:
    Up to 30 mm (1.25 inch)

136-3E Wire/Cable Tension Meter
(for wires anchored at both ends)

136-3E
  • Closed circuit tension meter
  • 5 Ranges:
    up to 1,000lb
  • Accuracy:
    ± 1.5% Full Scale or better
  • Cable Thickness:
    Up to 5 mm (0.2 inch)

QB-10000 Elevator Cable Tension Meter

QB-10000
  • Elevator Cable Tension Meter
  • Elevator Inspections
  • Quickly balance wire ropes
  • Measure total weight of the carried weight
Contact 
Contact Us
Your information request is sent!
We'll contact you as soon as possible.
  Information