We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

Accept Cookies

Cookie Settings

Call us for more information
+44 (0)121 2855 222

DT-725 Digital Stroboscope - Battery Powered

Click on an image for a larger image

DT-725 Digital Stroboscope - Battery Powered

The DT-725 Digital Stroboscope - Battery Powered is no longer available and has been replaced by DT-735.
Click here to see the DT-735.

Flash Range: 40-12.500 RPM/FPM

The Check-Line DT-725 Digital Stroboscope is a highly stable, industrial-quality measuring instrument. The DT-725 is developed for non-contact RPM measurement as well as for inspection and observation of moving parts by "freezing" or "slowing down" the action.

Optionally, a "Kit" version is available includinga carrying case and a spare flash tube at minimal additional cost.

Features

Highly accurate speed control with drift-free operation
Instant double (2x) and half-rate (÷2) flash selection
Extremely lightweight and rugged
Easy-to-use controls with bright LED display
Phase shift adjustment permits movement of objects to desired position for convenient observation
Accepts input from sensor for external flash triggering
Without CE Certification

External Trigger Input Signal

A) 12 - 24 V DC through a 3-wire NPN sensor (requires external power supply)
B) 12 V DC through a 2-wire proximity sensor (Leakage Current 1 mA max. Load current 8 mA min.)
C) Switch or Relay Contact

Dimensions

Complete Kit

Optional a Complete Kit is offered which also includes a carrying case and spare flash tube at minimal additional cost.

Cic-Strobe Stroboscope Calibration

Easy planning of calibration
Short turnaround
Exclusively using a standard which is traceable to British national standards and International standards ISO/IEC 17025

More details

Accessories

Category Stroboscope Accessories

More details

Downloads

Specifications

Flash Range	40.0 - 12,500 FPM
Accuracy	± 0.02% of reading
Resolution	(0.1) 40.0 - 4,999.9 (0.2) 5,000.0 - 7,999.8 (0.5) 8,000.0 - 9,999.5 (1.0) 10,000.0 - 12,500.0
Display	5-Digit LED, 8 mm high
Flash Tube	Xenon, 10 watt
Tube Life	100 million flashes
Flash Duration	10 - 15 µs
Signal Output	NPN Open Collector, 24 VDC max.
Phase Shift	0 - 359° (Internal Mode)
Operating Time	1 hour
Charging Time	15 Hours
Low Batt Indicator	LED light on display
Operating Temperature	0 to 40° C
Weight	1.25 Kg (2.75 lbs. )
Warranty	1 year