The LS-5's flash rate can be externally triggered by an external sensor/controller on the process machine or the LS-5-RCU Remote Controller can be optionally specified for this purpose. Refer to separate webpage on the LS-5-RCU.
The LS-5 produce a bright, sharp image under observation when the flash rate is synchronized with the "repeat rate" of the web material. The strobe operates using 24V DC (15 - 28V DC) using power already available on the machine or by using our worldwide AC-DC power adapter available as an option.
The brightness, sharpness and uniform light output provided by the LS-5 is unmatched in the market based on it compact size and low cost. It is especially well-suited for use on narrow web equipment up to 16 inches in width (400 mm width) and even wider. Two or more units can be used together in a Master/Slave arrangement when wider web widths must be covered.
|Flash Range||0 - 12,500 FPM (flashes per minute)|
|Power Supply||15 - 28 V DC / 12 Watts|
DIN 41525 5-pin standard plug
Universal power supply unit available
|External Trigger Input||3 - 30 V / max 5 mA|
DIN 41524 5-pin standard plug
Uout = Uin, max 200 mA
|Life Cycle||> 200,000,000 flashes (@6000 FPM)|
|Flash Duration||< 5 µs|
|Illumination Intensity||Single flash 10 megalux @ 30cm (12 inches)|
|Illumination intensity||500 lux @ 30cm (12 inches), 6000 FPM|
|Illumination Area||20x30 cm|
|Light Colour||6000 - 6500 K|
|Flash Energy||600 mJ @ ¡©¡Â 1200 FPM|
|Dimensions||150 x 130 x 112 mm / 6.0" x 5.1" x 4.4"|
|Weight||870 g (1.9 lbs.)|
|Ambient Temperature||0 - 40 °C (32-104 °F)|
|Air Humidity||Max 95%, non-condensing|
|Mounting Holes||Threaded 1/4 x 20 unc and 2x M5 holes on bottom side of strobe housing|