We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

For support please call
+44 (0)121 2855 222

F105 / F305 / F505 / F505H


Made in the USAAdvanced Test Frames

This F Series of advanced test frames is designed for tension and compression force testing applications, with force capacities from 0,5 kN to 2,2 kN. Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and a large variety of grips and fixtures.

Set up tests, and record and analyze data using the IntelliMESUR® software. From basic testing to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.


Features
Simple controller interface

Rigid and precise design
Exceptionally firm frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0,05 mm under any condition. Stepper motors and controllers drive a ballscrew and linear guideway for smooth and quiet operation, with no speed variation under load.

Limit switches Modular design
Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.
Adjustable mounting plate with T-slot base External limit switches
Upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Modular design Seamless Force Sensor Interface
Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H. Ranges available from 0,5 N to 2,5 kN. Accurate to ±0.1% of full scale.

Series R07 S-beam type force sensors accommodate higher force ranges from 250 N to 7,5 kN and are also compatible with Plug & Test® technology. Accurate to ±0.15% of full scale.

FollowMe Easy-to-service electronics
Most electronics are housed in an integrated module, which are easily replaced without special tools or processes.

Specifications Model F105
 Model F105Model F305Model F505Model F505H
Load capacity0,5 kN1,5 kN2,2 kN2,2 kN
Maximum travel distance457 mm457 mm457 mm457 mm
Speed range0,5 - 1.100 mm/min0,5 - 1.100 mm/min0,5 - 1.100 mm/min0,5 - 1.100 mm/min
Load accuracy (% of full scale)
  • Test frame: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
  • Test frame: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
  • Test frame: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
  • Test frame: ±0.1%
  • Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15%
Load sampling rate20.000 Hz20.000 Hz20.000 Hz20.000 Hz
Data acquisition rate1.000 Hz1.000 Hz1.000 Hz1.000 Hz
Speed accuracy±0.2% of setting, virtually no variation with load±0.2% of setting, virtually no variation with load±0.2% of setting, virtually no variation with load±0.2% of setting, virtually no variation with load
Distance accuracy±0,05 mm, factory-compensated at up to full load±0,05 mm, factory-compensated at up to full load±0,05 mm, factory-compensated at up to full load±0,05 mm, factory-compensated at up to full load
Distance resolution0,01 mm0,01 mm0,01 mm0,01 mm
Limit switch repeatability0,03 mm0,03 mm0,03 mm0,03 mm
PowerUniversal input 100-240 VAC, 50/60 Hz, 300WUniversal input 100-240 VAC, 50/60 Hz, 300WUniversal input 100-240 VAC, 50/60 Hz, 300WUniversal input 100-240 VAC, 50/60 Hz, 300W
Fuse type1,2 A, 250V, 3AG, SLO BLO1,2 A, 250V, 3AG, SLO BLO1,2 A, 250V, 3AG, SLO BLO1,2 A, 250V, 3AG, SLO BLO
Weight27 kg (test frame)
34 kg (shipping weight)
27 kg (test frame)
34 kg (shipping weight)
32 kg (test frame)
39 kg (shipping weight)
32 kg (test frame)
39 kg (shipping weight)
Environmental conditions
  • Indoor use only
  • Up to 2,000 m above sea level
  • Temperature range: 5 – 35°C
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
  • Indoor use only
  • Up to 2,000 m above sea level
  • Temperature range: 5 – 35°C
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
  • Indoor use only
  • Up to 2,000 m above sea level
  • Temperature range: 5 – 35°C
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
  • Indoor use only
  • Up to 2,000 m above sea level
  • Temperature range: 5 – 35°C
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
ConformanceCE markCE markCE markCE mark
Warranty3 years3 years3 years3 years

Load capacity is reduced at higher speeds, as follows:
– F305: limited to 1 kN above 610 mm/min
– F505 / F505H: limited to 1,5 kN above 610 mm/min

Complete Kit

The F105, F305, F505, and F505H are shipped as a complete kit, including the following accessories:

  • 1 Control panel, mounting bracket, and hardware (-IMT models only)
  • 1 Mounting bracket, column end (F505H only)
  • 1 USB flash drive containing software installation files (-IM models only)
  • 1 USB dongle (-IM models only)
  • 1 USB cable
  • 1 #10-32M medium hook
  • 1 5/16-18M large hook
  • 1 #10-32F 2” diameter compression plate
  • 1 #10-32 M/F 2” extension rod
  • 1 #10-32 F/F coupler
  • 1 Adapter, 5/16-18M to #10-32F
  • 1 Set screw, #10-32 x 3/4”
  • 2 Hex nuts, #10-32
  • 1 Power cord
  • 1 Allen wrench set
  • 1 NIST-traceable calibration certificate


Downloads

Dimensions
Models F105 / F305 / F505
Dimensions F105 / F305 / F505 / F505H


 Model F505H   
Dimensions-2Motorized Force Test Stands F105 / F305 / F505 / F505H

Related Products

Series FS05 Series FS05 Force Sensors


  • Mount directly to crosshead of models F105, F305, F505, and F505H without any connection cables
  • Member of the Plug & Test® family of interchangeable sensors and indicators (adapter required)
  • Measure tension and compression force

More details

Series FS05 Series FS05 Force Sensors

Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!