We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

Model-5I Advanced Digital Force/Torque Indicator


Made in the USA

The Model-5I Indicator is designed to work with a variation of Plug & Test® Force and Torque sensors or other strain gauge sensors by using a PTA Plug & Test® adapter.

With the different sensors the M5I is capable to measure tension. compression or torque in a large range of force or torque loads
The Model-5I has a sampling rate of 7000Hz, an accuracy of ±0,1% of full scale and a resolution of 1/5000, final accuracy depend on the sensor used
With an accessible navigation menu it is easy to make efficient use of the extensive features and configurable parameters of this Indicator.

The M5I Indicator is equipped with a memory up to 1000 measurements with statistical calculations, average force over time, external trigger modes and data output.
Data connectivity is provided through RS-232, Mitutoyo (Digimatic), USB or analog outputs.

The Digital Mark-10 Force/Torque Indicator model is available in a variation of 3 gauges and each compare largely with the similar numbered Force Gauge version.
The main difference is the use of a separate Plug & Test® sensors. One of the unique features of the Plug & Test® sensors is that they have their own PCB which stores the calibration and configuration data.
A Plug & Test® sensor can be switched to a different Indicator without the need for calibration or re-configuration.

The difference between the 3 Indicators can be found in the table below which shows the main specifications of each gauge type.
All gauges types are equipped with a rechargeable battery and a back lit display.
The indicators can be used for measuring tension, compression and torque depending on the type of sensor.

All Indicators come with MESUR® Lite data acquisition software.
MESUR® Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Mark-10 digital Indicators are versatile instruments, in a system with a Plug & Test® sensor they are combined with additional equipment to a purposely build test setup to perform the required tasks.

We are happy to assist you in finding the most suitable configuration for your needs. Please contact us for more information.  


Features
  • Interchangeable force and torque sensors through, separately sold, Plug & Test® technology
  • Password protection for individual keys and calibration
  • Sensor password protection, for preventing use of an unauthorized sensor
  • High-speed 7.000 Hz sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs
  • Large backlit graphic display
  • 1.000-point data memory with statistics (min, max, mean, standard deviation) and outputs
  • Live load bar graph with set point markers
  • Programmable set points, with alarms and outputs
  • Peak readings and set points always displayed
  • Averaging mode - calculates average readings over time
  • External trigger mode - for switch contact testing or remotely stopping display update
  • Automatic data output via USB/RS-232
  • 5 selectable units of measurement
  • Configurable audio alarms and key tones
  • CE and UKCA mark

Plug & Test® Smart Force & Torque Sensors

General information

Mark-10 M7I, M5I, and M3I indicators are used in combination with Plug & Test® sensors and can therefore accommodate numerous force and torque measurement requirements, from 1 N to 50 kN (0.25 to 10,000 lbF) of force, and from 7 Ncm to 550 Nm (10 ozFin to 5,000 lbFin) of torque.

Plug & Test® sensors can be used handheld or mounted to a fixture or test stand for more accurate and repeatable testing results.
The sensors are separately calibrated therefore they can be disconnected from one indicator and connected to another without the need for re-calibration or re-configuration as this is stored in the PCB located inside the smart connector.

As an alternative to the Plug & Test® sensors a PTA/PTAF Plug & Test® adapter can be used to connect common strain gage-based load cells, force sensors, and torque sensors to Models M7I, M5I, and M3I indicators and Series F test frames. Sensor capacity and resolution is configured via an included software utility, which includes a library of common force capacities from 0,5 N to 4.000 kN (0.12 to 750,000 lbF), and torque capacities from 7 Ncm to 57.000 Nm (10 ozFin to 40,000 lbFft). 

Accuracy

System accuracy is determined by the combination of Indicator and sensor combined. To determine the total system accuracy the accuracy value of the sensor is added to the value of the indicator.
As the Indicators have different accuracy values the total system accuracy may vary between the different indicator/sensor combinations. Indicator Model Accuracy M7I / M5I ±0,1% of full scale M3I ±0,2% of full scale.

Example 1 Model MR01-100 sensor with Model M5I Indicator MR01-100 ±0,15% of full scale + M5I ±0,1% of full scale = Total ±0,25% of full scale This translates into a fixed error of up to: 0,25% x 500 N = 1,25 N

Example 2 Model MR50-50Z sensor with Model M3I Indicator MR50-50Z ±0,35% of full scale + M3I ±0,2% of full scale = Total ±0,55% of full scale This translates into a fixed error of up to: 0,55% x 50 Ncm = 0,275 Ncm

Because accuracy is defined as a percentage of full scale, the fixed error is possible anywhere on the scale from 0 to the capacity. As such, this value represents an increasingly large error as percentage of reading towards the low end of the scale. It is, therefore, recommended that a sensor is selected with capacity as close as possible to the expected load. The resolution may be different for some sensors depending on whether a M7I, M5I, or M3I indicator is being used. For example, a Series R01 force sensor will display finer resolution when connected to a M5I indicator than when connected to a M3I indicator.


Video


Display

Display


M5I reversible housing

Reversible housing


Complete Kit

The M5I Force / Torque Indicator is shipped as shown at left, and includes the following accessories:

  • Carrying case
  • USB cable
  • AC adapter
  • Battery
  • Certificate of calibration without data

    Force and torque sensors are available separately.

 



Dimensions
Dimensions-Series-5I


Accessories

R01 Series S-Beam Force Sensor


  • Measures tensile and compressive forces
  • Durable S-beam load cell
  • Capacities available from 250 N to 50 kN
  • Two threaded holes on each side

More details

R01 Series S-Beam Force Sensor 126903

R02 Series Sensor for Compression Force


  • Button sensor with stainless steel construction
  • For compressive loads of up to 50 kN

More details

R02 Series Sensor for Compression Force 126904

R03 Series Smart sensor for tension and compression force


  • Measures tensile and compressive forces
  • Inline force sensor

More details

R03 Series Smart sensor for tension and compression force 126905

R04 Series Miniature S-Beam Force Sensor


  • Measures tensile and compressive forces from 1N up to 500 N

More details

R04 Series Miniature S-Beam Force Sensor 126906

R05 Series Push/Pull Sensors


  • Measures push and pull force up to 2500 N

More details

R05 Series Push/Pull Sensors  126907

R50 Series Universal Torque Sensor with Jacobs chuck


  • Unique Plug & TestTM connector holds all calibration and configuration data

More details

R50 Series Universal Torque Sensor with Jacobs chuck 126909

R51 Series Universal Torque Sensors for bi-directional torque testing


  • Interchangeable chucks (order separately)

More details

R51 Series Universal Torque Sensors for bi-directional torque testing 126913

R52 Series Torque Sensor for calibrating tools


  • May be used for torque tool calibration or as a component of a torque testing system

More details

R52 Series Torque Sensor for calibrating tools 126912

PTA PTA/PTAF Plug & Test Load Cell Adapter


  • Compatible with strain gage-based load cells, force sensors, and torque sensors
  • Program the adapter via USB or RS-232 through the indicator

More details

PTA PTA/PTAF Plug & Test Load Cell Adapter 127060

R55 Series robust Square Drive Torque Sensor


  • Square drives on each end

More details

R55 Series robust Square Drive Torque Sensor 127114

AC1008 Table Top Stand for 5I, 3I or TT03


  • For mounting the 5I, 3I or TT03 Series displays on a table

More details

AC1008 Table Top Stand for 5I, 3I or TT03 126928

Mesurgauge / Mesurgauge plus Load & Travel Analysis Software


  • Sends data from a force or torque gauge and travel display to a PC for further analysis

More details

Mesurgauge / Mesurgauge plus Load & Travel Analysis Software 126514

Category Mark-10 Attachments


More details

Category  Mark-10 Attachments 0

Cic-Torque Torque Instrument Calibration


  • Short turnaround
  • Easy planning of calibration

More details

Cic-Torque Torque Instrument Calibration 127043

Video


Specifications
Accuracy:±0,2% of full scale ±1 digit + sensor
Sampling rate:7.000 Hz
Power:AC or rechargeable battery.
Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery Life:Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Outputs: USB / RS-232: Configurable up to 115.200 baud. Includes Gauge Control Language 2 for full computer control.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices.
Analog: ±1 VCD, ±0,25% of full scale at capacity.
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Configurable Settings:Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibration
Safe overload:150% of full scale (display shows “OVER” at 110% and above)
Weight:0,3 kg (0.7 lbs)
Shipping weight0,3 kg (0.7 lb)
Included items:Carrying case, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR® Lite software, MESUR® gauge DEMO software, and user's guide), NIST-traceable certificate of calibration.
Warranty:3 years (see individual statement for further details)

Indicator Comparison
 Model-7IModel-5IModel-3I
Accuracy (% of full scale + sensor)±0,1%±0,1%±0,2%
Sampling rate14.000 Hz7.000 Hz2.000 Hz
Resolutionup to 1/2000, depending on sensorup to 1/2000, depending on sensor1/1000
Units of measurement7, including coefficient of friction unit and user-defined unit53
Compability with Mark-10 sensors via Plug & TestTM TechnologyYesYesYes
Data outputsUSB, RS-232, Mitutoyo, analogUSB, RS-232, Mitutoyo, analogUSB
- RS-232Configurable up to 115.200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.Configurable up to 115.200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.No
- USBConfigurable up to 115.200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.Configurable up to 115.200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control.Configurable up to 115.200 baud
- Mitutoyo (Digimatic)Serial BCD suitable for all Mitutoyo SPC-compatible devicesSerial BCD suitable for all Mitutoyo SPC-compatible devicesNo
- Analog±1 VDC, ±2% of full scale at capacity. No
- General purpose I/OThree open drain outputs, one input.Three open drain outputs, one input.No
- Set pointsThree open drain lines.Three open drain lines.No
Data capture & storage capabilitiesUp to 5.000 data pointsUp to 1.000 data pointsNo
Data memory deletionAny individual data point, or clear allAny individual data point, or clear allN/A
Mesur Lite software includedYesYesYes
Interface w/MESUR® gauge and MESUR® LitFull communicationFull communicationSingle point or continuous data output only
ASCII command set for external communicationFull command setFull command set“?” command only (for continuous or individual data point output)
Interface with ESM303 test standsYesYesNo
Statistical calculations and output to PCMax, min, mean, std. dev., number of readings, with outputMax, min, mean, std. dev., number of readings, with outputNo
Averaging modeYes with configurable storage, output and zero functionsYesNo
1st / 2nd peak detection*YesNoNo
Set points (for pass / fail indication)Yes, with high / low indicators, markers on analog bar graph, and outputsYes, with high / low indicators, markers on analog bar graph, and outputsYes, with high / low indicators, markers on analog bar graph, no output
Peaks and analog load bar always shown on displayYesYesYes
External trigger modeYes, with auto stop option on motorized test standsYesNo
Break detection*YesNoNo
stop travel of motorized test standYesNoNo
Programmable footswitch command stringYesNoNo
Password Protection, for keys and calibrationYesYesNo
Sensor password protectionYesYesYes
Overload outputs, w/separate pins for each directionYesYesYes
Included itemsCarrying case with AC adapter, rechargeable battery, and certificate of conformanceCarrying case with AC adapter, rechargeable battery, and certificate of conformanceCarrying case with AC adapter, rechargeable battery, and certificate of conformance

Related Products

Series-3I Force/Torque Indicator


  • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
  • High-speed 2.000 Hz sampling rate
  • Ultra-compact size

More details

Series-3I Force/Torque Indicator

Series-7I Advanced Force/Torque Indicator


  • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
  • High-speed 14.000 Hz sampling rate
  • Continous data capture of up to 5.000 data points, at up to 14.000 Hz, downloadable to a PC
  • 5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name

More details

Series-7I Advanced Force/Torque Indicator

F105 / F305 / F505 / F505H Force Test Frame with IntelliMESUR® controls


  • Set up, run, and analyze data via the integrated IntelliMESUR® control panel
  • Integrated motion control and data collection solution with seamless interface for FS05 force sensor without cables
  • Plug & Test® system can work with third-party load cells through PTAF adapter

More details

F105 / F305 / F505 / F505H Force Test Frame with IntelliMESUR® controls

F755 / F1505 F755 / F1505 Force Test Frame


  • Set up, run, and analyze data via the integrated IntelliMESUR® control panel
  • Build in test creation wizards
  • Integrated motion control and data collection solution.

More details

F755 / F1505 F755 / F1505 Force Test Frame

Downloads

Buy Now
Product

Product
Price
Quantity
133296
M5I-E -Series 5I Advanced Torque/Force Indicator
€ 999,00 
 
Accessories

Product
Price
Quantity
130524
15-1004 MESUR gauge, single license
€ 692,00 
132825
09-1163 Cable, serial, Series 7/5/4 to RS-232 DB-9
€ 78,00 
132876
09-1165 Cable, USB, Series 7/5/4/3 to PC
€ 29,00 
132826
08-1026 Replacement battery, 8.4V NiMH
€ 20,00 
131954
AC1030 AC adapter/charger, 110V US
€ 44,00 
131955
AC1031 AC adapter/charger, 220V Europe
€ 44,00 
132878
AC1032 AC adapter/charger, 220V UK
€ 44,00 
132879
AC1035 AC adapter/charger, 220V Australia
€ 44,00 
131958
AC1008 Stand, indicator/TT03, table top
€ 166,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

\n