We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

R04 Series Miniature S-Beam Force Sensor


Made in the USAWhen space is constrained the Series R04 smart force sensor might be the perfect solution. With its compact design this sensor is ideal for tension and compression measurement applications with tight space constraints. It features threaded holes on two sides for mounting attachments.

The Series R04 is available in a range of 8 load versions from 1 to 500 kN and features an outstanding overload protection.

With its Plug & Test® system connection this sensor is attached to a Mark-10 Indicator, 3I, 5I, 7I or a Series F test stand. This system has the benefit of an internal pcb which stores calibration and configuration, this makes an indicator interchangeable during testing.


Features
  • Compatible with the Series 7i, 5i and 3i digital force indicators
  • Unique Plug & TestTM connector holds all calibration and configuration data
  • Ultra-compact size
  • Measures tensile and compressive forces from 1N up to 500 N
  • NIST-traceable certificate of calibration included
  • Warranty: 3 years

Plug &Test® Smart Force & Torque Sensors

General information

Mark-10 M7I, M5I, and M3I indicators are used in combination with Plug & Test® sensors and can therefore accommodate numerous force and torque measurement requirements, from 1 N to 50 kN (0.25 to 10,000 lbF) of force, and from 7 Ncm to 550 Nm (10 ozFin to 5,000 lbFin) of torque.

Plug & Test® sensors can be used handheld or mounted to a fixture or test stand for more accurate and repeatable testing results.
The sensors are separately calibrated therefore they can be disconnected from one indicator and connected to another without the need for re-calibration or re-configuration as this is stored in the PCB located inside the smart connector.

Accuracy

System accuracy is determined by the combination of Indicator and sensor combined. To determine the total system accuracy the accuracy value of the sensor is added to the value of the indicator.
As the Indicators have different accuracy values the total system accuracy may vary between the different indicator/sensor combinations. Indicator Model Accuracy M7I / M5I ±0,1% of full scale M3I ±0,2% of full scale.

Example 1 Model MR01-100 sensor with Model M5I Indicator MR01-100 ±0,15% of full scale + M5I ±0,1% of full scale = Total ±0,25% of full scale This translates into a fixed error of up to: 0,25% x 500 N = 1,25 N

Example 2 Model MR50-50Z sensor with Model M3I Indicator MR50-50Z ±0,35% of full scale + M3I ±0,2% of full scale = Total ±0,55% of full scale This translates into a fixed error of up to: 0,55% x 50 Ncm = 0,275 Ncm

Because accuracy is defined as a percentage of full scale, the fixed error is possible anywhere on the scale from 0 to the capacity. As such, this value represents an increasingly large error as percentage of reading towards the low end of the scale. It is, therefore, recommended that a sensor is selected with capacity as close as possible to the expected load. The resolution may be different for some sensors depending on whether a M7I, M5I, or M3I indicator is being used. For example, a Series R01 force sensor will display finer resolution when connected to a M5I indicator than when connected to a M3I indicator.


Video


Dimensions
Dimensions-R04 Series

Dimensions-R04 Series


Capacity x Resolution With Models 5i and 7i Indicators
ModelNmNkgFgFozFlbF
MR04-0251 x 0,00051000 x 0,5-100 x 0,054 x 0,0020,25 x 0,0001
MR04-052,5 x 0,0012500 x 1-250 x 0,18 x 0,0050,5 x 0,0002
MR04-210 x 0,005-1 x 0,00051000 x 0,532 x 0,022 x 0,001
MR04-525 x 0,01-2,5 x 0,0012500 x 180 x 0,055 x 0,002
MR04-1050 x 0,02-5 x 0,0025000 x 2160 x 0,110 x 0,005
MR04-20100 x 0,05-10 x 0,00510000 x 5320 x 0,220 x 0,01
MR04-50250 x 0,1-25 x 0,0125000 x 10800 x 0,550 x 0,02
MR04-100500 x 0,2-50 x 0,0250000 x 201600 x 1100 x 0,05

Capacity x Resolution With Model 3I Indicator
ModelNgFkgFlbF
MR04-0251 x 0,001100 x 0,1-0,25 x 0,0002
MR04-052,5 x 0,002250 x 0,2-0,5 x 0,0005
MR04-210 x 0,01-1 x 0,0012 x 0,002
MR04-525 x 0,02-2,5 x 0,0025 x 0,005
MR04-1050 x 0,05-5 x 0,00510 x 0,01
MR04-20100 x 0,1-10 x 0,0120 x 0,02
MR04-50250 x 0,2-25 x 0,0250 x 0,05
MR04-100500 x 0,05-50 x 0,05100 x 0,1

Specifications
Accuracy:± 0.2% of full scale + indicator
Weight:0.007 kg
Shipping weight0,9 kg
Warranty:3 years

Related Products

Cic-Force Calibration Force Gauge


  • Short turnaround
  • Exclusively in accordance with Deutscher Kalibrierdienst (DKD) working standards, class F1; calibration-no: 19026 - 07
  • Possibility to adjust and repair

More details

Cic-Force Calibration Force Gauge

Series-3I Force/Torque Indicator


  • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
  • High-speed 2.000 Hz sampling rate
  • Ultra-compact size

More details

Series-3I Force/Torque Indicator

Series-5I Advanced Digital Force/Torque Indicator


  • Interchangeable force and torque sensors through, separately sold, Plug & Test® technology
  • High-speed 7.000 Hz sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs

More details

Series-5I Advanced Digital Force/Torque Indicator

Series-7I Advanced Force/Torque Indicator


  • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
  • High-speed 14.000 Hz sampling rate
  • Continous data capture of up to 5.000 data points, at up to 14.000 Hz, downloadable to a PC
  • 5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name

More details

Series-7I Advanced Force/Torque Indicator

Category Motorized Force Test Stands


Motorized Force Test Stands highly configurable for industrial or laboratory use. For various applications as break testing, cycling, limit testing & much more.

More details

Category  Motorized Force Test Stands Motorized Force Test Stands

Category Mark-10 Attachments


More details

Category  Mark-10 Attachments Mark-10 Attachments

Downloads

Buy Now
Products

Product
Price
Quantity
138042
MR04-05M Force Sensor - 2.5 N Metric
€ 1.696,00 
133198
MR04-2 Force Sensor - 10 N
€ 1.696,00 
133199
MR04-5 Force Sensor - 25 N
€ 1.696,00 
138039
MR04-10M Force Sensor - 50 N Metric
€ 1.696,00 
133201
MR04-20 Force Sensor - 100 N
€ 1.696,00 
133202
MR04-50 Force Sensor - 250 N
€ 1.696,00 
133203
MR04-100 Force Sensor - 500 N
€ 1.696,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

\n