We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

SERIES-2 Economical Digital Force Gauges


Made in the USA

The Economical Series-2 Digital Force Gauges are developed as an entry gauge for basic force testing applications.
With its accuracy of ±0,5% and a 500Hz sampling rate and peak readings this device captures reliable readings for applications in both production and laboratory environments.

The compact Series-2 Digital Force Gauge comes in 8 force versions ranging from 10 to 2500N.
It features a backlit graphic display comes in an aluminum reversible housing and can be used as hand held or fixture mounted device.
Series-2 Force Gauges are compatible with a wide range of test stands and gripping fixtures.

The Digital Mark-10 Series Force Gauge range is available in a variation of 5 gauges with each gauge type available in a scale of force ranges.
Each type of gauge has its own specifications, the table below shows the main specifications of each gauge type.
All gauges types are equipped with a rechargeable battery, a back lit display and reversible aluminum housing.
The Series-# Digital Force Gauges are designed  to be used for measuring tension and compression forces.

Mark-10 Digital Force Gauges are versatile instruments, in general they are combined with additional equipment to a purposely build system to perform the required tasks.

We are happy to assist you in finding the most suitable configuration for your needs. Please contact us for more information. 


Features
  • Calculates peak tension and compression values
  • 3 selectable units of measurement
  • Ultra-compact, ergonomic housing
  • Configurable default measurement unit and mode
  • 500 Hz sampling rate
  • Large, backlit graphic display with auto-dimming
  • Powered by rechargeable battery or AC adapter
  • Reversible housing for alternate load cell orientation
  • 3 Year Warranty

Force Ranges, Capacity & Resolutions
ModellbFkgFN
M2-22 x 0,0021 x 0,00110 x 0,01
M2-55 x 0,0052.5 x 0,00225 x 0,02
M2-1010 x 0,015 x 0,00550 x 0,05
M2-2020 x 0,0210 x 0,01100 x 0,1
M2-5050 x 0,0525 x 0,02250 x 0,2
M2-100100 x 0,150 x 0,05500 x 0,5
M2-200200 x 0,2100 x 0,11000 x 1
M2-500500 x 0,5250 x 0,22500 x 2

Load Cell Thread Specifications
GaugeM2-2 – M2-100M2-200 - M2-500
Load Cell Thread #10-32 UNF5/16-18 UNC

LCD Display

Display


Reversible housing

reversible housing


Complete Kit

The Series-2 is supplied as a kit including:

  • force gauge
  • AC adapter
  • battery
  • quick-start guide
  • resource CD (user's guide)
  • NIST-traceable certificate of calibration (data is available for an additional charge)


Dimensions
Dimensions-SERIES-2


Series-2 force gauge models M2-2 tot M2-500 all have the same dimensions

All dimensions are noted in Inches with metric sizes in (mm) behind.


Accessories

Category Mark-10 Attachments


More details

Category  Mark-10 Attachments 0

Cic-Force Calibration Force Gauge


  • Easy planning of calibration
  • Short turnaround
  • Exclusively in accordance with Deutscher Kalibrierdienst (DKD) working standards, class F1; calibration-no: 19026 - 07

More details

Cic-Force Calibration Force Gauge 127037

G1024-G1031 Extension Rods


  • Suitable for tension and compression testing (not reconmended for compression testing see general)
  • Capacity 1000/2500 N
  • Male and Female thread

More details

G1024-G1031 Extension Rods 126108

G1026-G1033 Cones


  • Available in 2 sizes
  • Capacity 1000 and 2500 N
  • Suited for puncture and compression testing

More details

G1026-G1033 Cones 126111

G1025-G1032 Chisels


  • Available in 2 sizes
  • For compression testing
  • Capacity 1000 N / 2500 N

More details

G1025-G1032 Chisels 126109

G1027 - G1034 V-Groove Attachments


  • Available in 2 sizes
  • 200 lb / 500 lb capacity,
  • Compression testing

More details

G1027 - G1034 V-Groove Attachments 126112

G1029 - G1036 Flat Heads


  • General compression testing
  • Capacity 1000 N / 2500 N
  • Available in 2 sizes

More details

G1029 - G1036 Flat Heads 126107

G1028, G1038, G1035 and G1042 Hooks


  • Tensile testing
  • Capacities available from 100 N up to 4500 N
  • Select from four sizes, snap hook is also available

More details

G1028, G1038, G1035 and G1042 Hooks 126110

G Series Thread Adapters & Couplings



    More details

    G Series Thread Adapters & Couplings 126105

    Specifications
    Accuracy±0,5% of full scale
    Sampling Rate500 Hz
    USB outputConfigurable up to 115,200 baud
    PowerAC or rechargeable battery.
    Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
    Battery LifeBacklight on: up to 24 hours of continuous use
    Backlight off: up to 92 hours of continuous use
    Measurement UnitsN, lbF, kgF
    Safe Overload200% of full scale (display shows “OVER” at 110% and above)
    WeightM2-2 – M2-100: 0,33 kg [0.7 lb]
    M2-200 – M2-500: 0,41 kg [0.9 lb]
    Environmental Requirements0 - 40°C, max. 96% humidity, non-condensating
    Warranty3 years
    Country of OriginUSA

    Force Gauge comparison table
     Series-7 ProfessionalSeries-5 AdvancedSeries-4 PerformanceSeries-3 BasicSeries-2 Economical
    Accuracy±0,1%±0,1%±0,2%±0,3%±0,5%
    Sampling rate14.000 Hz7.000 Hz3.000 Hz2.000 Hz500 Hz
    Resolution1/5.0001/5.0001/2.0001/1.0001/1.000
    Units of measurementlbF, ozF, gF, kgF, N, kN, mN (depending on model)lbF, ozF, gF, kgF, N, kN, mN (depending on model)lbF, ozF, gF, kgF, N, kN, mN (depending on model)lbF, gF, kgF, N (depending on model)lbF, kgF, N
    OutputsUSB, RS-232, Mitutoyo, AnalogUSB, RS-232, Mitutoyo, AnalogUSB, RS-232, Mitutoyo, AnalogUSBUSB
    - RS-232Configurable up to 230.400 baudConfigurable up to 115.200 baudConfigurable up to 115.200 baudNoNo
    - USBConfigurable up to 230.400 baudConfigurable up to 115.200 baudConfigurable up to 115.200 baudConfigurable up to 115.200 baudConfigurable up to 115.200 baud
    - Mitutoyo (Digimatic)Serial BCD suitable for all Mitutoyo SPC-compatible devicesSerial BCD suitable for all Mitutoyo SPC-compatible devicesSerial BCD suitable for all Mitutoyo SPC-compatible devicesNoNo
    - Analog±1 VDC, ±0,25% FS at capacity. Positive for compression, negative for tension±1 VDC, ±0,25% FS at capacity. Positive for compression, negative for tension±1 VDC, ±0,25% FS at capacity. Positive for compression, negative for tensionN/AN/A
    - General purpose I/OThree open drain outputs, one inputThree open drain outputs, one inputThree open drain outputs, one inputN/AN/A
    - Set pointThree open drain linesThree open drain linesThree open drain linesN/AN/A
    Mesur-Lite software includedYesYesYesYesYes
    Data output functionalityAutomatic output or by pressing DATA button, or requesting from a PC or other device.Automatic output or by pressing DATA button, or requesting from a PC or other device.By pressing DATA button, or requesting from a PC or other device (currently displayed reading only).By pressing DATA button, or requesting from a PC or other device (currently displayed reading only).By pressing DATA button, or requesting from a PC or other device (currently displayed reading only).
    ASCII command set for external controlFull command setFull command set“?” only (request current reading)“?” only (request current reading)“?” only (request current reading)
    Interface w/MESUR® gauge and MESUR® LiteFull communicationFull communicationSingle point or continuous data output onlySingle point or continuous data output onlySingle point or continuous data output only
    Interface with ESM303 / 750 / 1500 test standsFull communication, including PC controlFull communication, including PC controlLimited to force data, overload protection, and force set pointsN/AN/A
    Data memory5.000 readings, with output1.000 readings, with output50 readings, with outputNoNo
    Data memory deletionAny individual data point, or clear allAny individual data point, or clear allAny individual data point, or clear allN/AN/A
    Statistic calculations and output to PCMax, min, mean, std. dev., number of readings, with outputMax, min, mean, std. dev., number of readings, with outputMax, min, mean, std. dev., number of readings, with outputN/AN/A
    Break detectionYesNoNoNoNo
    1st / 2nd peak detectionYesNoNoNoNo
    Programmable footswitch command stringYesNoNoNoNo
    Averaging modeYesYesNoNoNo
    External trigger modeYesYesNoNoNo
    Analog load bar graph shown on displayYesYesYesYesNo
    Set points (for pass / fail indication)Yes with high / low indicators, markers on analog bar graph, and outputsYes with high / low indicators, markers on analog bar graph, and outputsYes with high / low indicators, markers on analog bar graph, and outputsYes with high / low indicators, markers on analog bar graph, and outputsNo
    Password protectionYes, for calibration and individual keysYes, for calibration and individual keysNoNoNo
    Peak readings always displayedYesYesYesYesNo (Peak mode must be selected)
    Programmable audible tonesYesYesYesYesNo
    Calibration procedureConfigurable number of data points (up to 10 in each direction)Configurable number of data points (up to 10 in each direction)Configurable number of data points (up to 10 in each direction)Configurable number of data points (up to 10 in each direction)Configurable number of data points (up to 10 in each direction)
    Overload outputsDedicated pins for tension and compressionDedicated pins for tension and compressionDedicated pins for tension and compressionNoNo
    Safe overloads200% of full scale (display shows warning at 110% and above)200% of full scale (display shows warning at 110% and above)200% of full scale (display shows warning at 110% and above)200% of full scale (display shows warning at 110% and above)200% of full scale (display shows warning at 110% and above)

    Related Products

    ES20 Manual test stand


    • Mounting holes for bench mounting
    • Optional 25.4 mm dial indicator travel kit

    More details

    ES20 Manual test stand

    Series-3 Digital Force Gauge


    • High-speed 2.000 Hz sampling rate
    • USB data output of continuous or individual data points

    More details

    Series-3 Digital Force Gauge

    Series-4 Advanced Digital Force Gauges


    • High-speed 3.000 Hz sampling rate
    • USB, RS-232, Mitutoyo, and analog outputs

    More details

    Series-4 Advanced Digital Force Gauges

    Series-5 Advanced Digital Force Gauge


    • ±0,1% accuracy
    • High-speed 7.000 Hz peak sampling rate
    • 1.000-point data memory with statistics and outputs

    More details

    Series-5 Advanced Digital Force Gauge

    Series-3I Force/Torque Indicator


    • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
    • High-speed 2.000 Hz sampling rate
    • Ultra-compact size

    More details

    Series-3I Force/Torque Indicator

    Category Force Gauge Test Stands


    Checkline's gauge force test stands guarantee optimal accuracy of force measurements. Modular configurations offer highest individualization.

    More details

    Category  Force Gauge Test Stands Force Gauge Test Stands

    Downloads

    Buy Now
    Products

    Product
    Price
    Quantity
    133858
    M2-2E Digital Force Gauge - 10 N
    € 494,00 
    133859
    M2-5E Digital Force Gauge - 25 N
    € 494,00 
    133860
    M2-10E Digital Force Gauge - 50 N
    € 494,00 
    133861
    M2-20E Digital Force Gauge - 100 N
    € 494,00 
    133862
    M2-50E Digital Force Gauge - 250 N
    € 494,00 
    133863
    M2-100E Digital Force Gauge - 500 N
    € 494,00 
    135522
    M2-200E Digital Force Gauge - 1000 N
    € 666,00 
    135523
    M2-500E Digital Force Gauge - 2500 N
    € 666,00 
     
    Accessories

    Product
    Price
    Quantity
    133952
    Carrying case M2 Force Gauge
    € 45,00 
    130826
    G1038 Hook, medium, #10-32M
    € 15,00 
    130340
    G1039 Coupling, #10-32F/F
    € 15,00 
    130277
    G1029 Flat head, #10-32F
    € 20,00 
    130581
    G1026 Cone Tip, #10-32F
    € 20,00 
    126830
    G1025 Chisel point, #10-32F
    € 20,00 
    130582
    G1027 V-Groove Tip, #10-32F
    € 20,00 
    130813
    G1024 Extension rod, 5”, #10-32M/F
    € 20,00 
    130334
    G1035 Hook, large, 5/16-18M
    € 25,00 
    130341
    G1037 Coupling, 5/16-18F/F
    € 20,00 
    130830
    G1036 Flat head, 5/16-18F
    € 25,00 
    130822
    G1033 Cone Point, 5/16-18F
    € 25,00 
    126831
    G1032 Chisel Point, 5/16-18F
    € 25,00 
    130823
    G1034 V-Groove Tip, 5/16-18F
    € 25,00 
    130816
    G1031 Extension rod, 5”, 5/16-18M/F
    € 25,00 
    130336
    G1031-1 Extension rod, 2”, 5/16-18M/F
    € 25,00 
    130344
    G1031-2 Extension rod, 1”, 5/16-18M/F
    € 25,00 
    133953
    Long Form NIST certificate with data (ordered with a new gauge)
    € 86,00 
    All mentioned prices are excluding VAT & excluding shipment costs.
    Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

    Contact 
    Request offer
    Your information request is sent!
    We'll contact you as soon as possible.
     Information