The BL2 Biomass Moisture Meter Kit is the most versatile biomass moisture meter kit available.
It is specifically developed for users that have to check a large variation of biomass materials.
By use of two different probes it can measure wood chips, sawdust, pellets, round wood, split logs, Hay bales and straw bales.
This Biomass Moisture Meter contains several moisture calibration curves that are activated by connecting the appropriate probe. Measuring results are displayed instantly and are temperature compensated.
The image on the left shows the gauge with the hammer probe with the 255mm Hay & Straw Pins attached.When this probe fitted with the nails it can be used for round wood and split logs.
Below the picture of the wood chip probe that can also be used for pellets and saw dust.
The BL2 can also be supplied with an USB interface (BL2-USB-KIT) and is supplied with USB cable and Software.
|Measuring range||up to 60% water content depending on material and probe type (represents 100% wood moisture)|
|Resolution||0.1% water content|
|Calibration Accuracy||± 2.5 %|
|Material Temperature Range||0° - 40° C (temperature range for determination of water content with temperature compensation)|
|Temperature Limits||-10°C to 80°C|
|Menu languages||English, German, French, Italian, Spanish and Russian|
|Housing||Plastic with rubber protection cover, IP40 rating|
|Data logger||10,000 moisture measurements plus date, batch & temperature|
|USB (supplied with data transfer cable & software)|
|Display||Graphic LCD display with backlight (128 x 64 pixel)|
|Power||4 x 1.5 Volt AA Alkaline batteries|
|Battery Life||900 measurements|
(with auto-off after 6 minutes of non-use)
|Weigth||6.4 Kg (Kit in Wooden case)|
|Dimensions||121 x 17.5 x 8cm (LxWxH)|
|Warranty||2 years Manufacturer warranty|
The complete kit consists of the following items: