Contact
Phone:
+44 (0)121 2855 222
Email :
sales@checkline.eu
The TI-25M-MMX precisely measures wall thickness of all metals, ceramics, glass and most rigid plastics and the extent of corrosion using ultrasonics. Measurements can be made from a single side!
The TI-25M-MMX has 2 measuring modes: Single Thickness Reading mode which measures the thickness on one point and the Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then.
The probe of the TI-25M-MMX wall thickness gauge is waterproof and can also be submerged in water. It is ideal to use in tough field conditions because the gauge is impact-resistant and environmentally sealed..
Measuring Range:
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.63 to 152.4 millimeters. If uncoated up to 500mm with T-102-2000 probe.
Echo-Echo Mode (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch).
 |
Minimum Radius for Convex Surfaces | 8.89 mm |
| Minimum Radius for Concave Surfaces | 76.2 mm | |
 |
Minimum Headroom | 25.4 mm |
 |
Minimum Sample Diameter | 3.8 mm |
 |
Minimum Substrate Thickness - F | NA |
| Minimum Substrate Thickness - NFe | NA |
| Range | <b>Pulse-Echo Mode</b> (Pit & Flaw Detection) measures from 0.63 to 500 millimeters (0.025 to 19.999 inches). <b>Echo-Echo Mode</b> (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch). |
| Resolution | 0.01 mm (.001") |
| Display | 4½ - Digit, 0.5" Backlit LCD |
| Velocity Range | 1250 to 10.000 meters/second (0.0492 to .3937 in./µs.) |
| Probe | 5 MHz, 6.35 mm Diameter (0.25") |
| Probe Wearface | PEEK (Polyethlethylketone) |
| Cable | 1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m. (50 ft.) |
| Temp. Limits | Ambient:-30 to 50° C (-20 to 120° F) Material: -20 to 100° C (0 to 200° F) Special high temperature probes are optionally available |
| Battery Type | Two AA batteries |
| Battery Life | 200 hours |
| Weight | 196 g (7 ounces) |
| Size | 64 x 114 x 32 mm (2.5 x 4.5 x 1.25") |
| Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
| Warranty | Gauge: 5 Years Probes: 90 Days |
| Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode | |||
|---|---|---|---|
| Model Number | Maximum Coating | Minimum Wall | Maximum Wall |
| All Models | 0.50 mm (0.020") | 2.54 mm (0.100") | 152.4 mm (6.000") |
| Selection Guide - Thru-Paint (Echo-Echo) Model | |||
| Model Number | Maximum Coating | Minimum Wall | Maximum Wall |
| TI-25M-MMX | 1.00mm (0.040") | 2.54mm (0.100") | 25.4mm (1.000") |
| TI-25M-MMX-EXT | 2.00mm (0.080") | 5.08mm (0.200") | 127.0mm (5.000") |
