Range: 0-99,999 Inches or Centimeters
CHECKLINE LM Digital Consumption Meters accurately measure the amount of yarn being fed from a textile machine feeder to a take-up device during one or more cycles or rotations of the machine cylinder.
LM units are ideal for comparing yarn consumption from feed to feed and machine to machine on circular and flat bed knitting machines, and for other textile processes where yarn length is to be accurately measured.
Two LM types are offered:
Models LMC and LMI manual type, where operator actuates and deactivates the measuring system after one or more operation cycles. (LMC is calibrated for centimeters; LMI is for inches). The consumption per cycle is then determined by dividing the total yarn consumption by the number of cycles or revolutions
Models LMC-S and LMI-S magnetic sensor type, where operator pre-sets number of cycles or revolutions (0-99) for the measuring period, eliminating the need to visually count the number of cycles. A small magnet is affixed to the rotating or moving part of the machine while the sensor is mounted on the frame. Each time the magnetic passes the sensor it actuates the instrument’s electronic counter.
Operation - LMI-S / LMC-S
In "Auto" mode a permanent magnet is mounted to a revolving part of the machine. The sensor supplies the start/stop signal. The predetermined number of revolutions (frome 1 - 99 rev. set on the rotary switches at the front side) are counted and the comulated yarn consumption is displayed.
In "Basic" mode the unit works without external sensor; Operator determines measuring time by pushing start - stop button.
Advantage of LM use:
|0 – 99,999 cm (or Inches)
|+/- 0.2% of displayed value, +/- 1 digit
|1 cm (or 1 Inch)
|LCD, 8mm high
|Measuring Wheel Access
|4mm wide x 270
|10 to 45 °C (50 to 120 °F)
|Pre-settable Cycle Capacity
|0 – 99 (LMI-S or LMI-C models only)