We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

TELC System Low Cost Tension Monitoring System

Made in GermanyTELC Sensor plus TD-1-TE Indicator Accurately measures the running line tensions of yarns, fibers, wires, cables, films & similar process materials - continuously!

The TELC System detects "out of tolerance" conditions and immediately alerts operating personnel. This enables them to take the appropriate corrective action to maintain the highest product quality.

Additionally, the TELC Tension Sensor can be installed separately, as part of a user-supplied control-loop system.

NEW RS232 Serial Output (optional)

  • Precision strain gauge accuracy of ± 1.5% or better
  • User-set high & low alarm limits with relays for alerting operating personnel of "out of tolerance" conditions
  • V-grooved rollers rated for speeds up to 2000 m/min are standard or, optionally, 3500 m/min (option K) or 5000 m/min (option HS)
  • Analog output for recording and control purposes
  • Built-in electronic damping to filter out fluctuating tension readings
  • RS232 Serial output (optional) allows you to connect your sensor to our SensorView software

Tension Ranges
TELC-100 0-100 g     
TELC-200 0-200 g     
TELC-500 0-500 g     
TELC-1K 0-1 Kg     
TELC-2K 0-2 Kg     
TELC-5K 0-5 Kg     
TELC-10K 0-10 Kg     

Dimensions-TELC System

Special Purpose Models
Tapes/Films & Tows
Type RX
Uses 7, 10, 15, 20 or 30 mm wide cylindrical rollers for "strip" materials. Wider materials can be accommodated with other models.
Heavy-Duty Model
Type 24
Uses 30mm diameter hardened steel rollers for heavy wires, cable tire cord and similar process materials subjected to high impact loads

Related Products

TD-1-TE Tension Indicator

  • User-set High & Low Alarm Limits with relays
  • TD-1 provides regulated +5 V DC for SR sensors
  • 4-20 mA and 0-10 VDC analog output for recording and control purpose

More details

TD-1-TE Tension Indicator

Accuracy±1.5% or better
Power Required12 - 24 V DC, regulated (20 mA)
Deflection0.5 mm maximum
Output (Standard)0-1 V DC
Output (Optional)0-10 V DC, 4-20 mA, RS-232 or RS-485
Analog: 0 –2 V AC, linearized, app. 500 Hz
Digital: RS 232 (9600,8,N,1)
Frequency Response50 Hz
Outer Roller Spacing40-200 mm, depending upon tension range, process material and application
Operating Temperature40 to 105° F (5-40° C)

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.