We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

TS621 Strain Gauge Amplifier


Made in GermanyThe TS621 Electronic Strain Gauge Amplifier provides outstanding signal conditioning capabilities suitable for use with most strain-gauge-based sensors. It is supplied in a DIN-Rail housing for convenient snap-in installation.

TS621 performance features include galvanic isolation, regulated power supply for the sensor, coarse and fine calibration adjustments, screw terminals for power and analog outputs, with a removable terminal block for the sensor input.


Features
  • Designed for use with a wide range of strain-gauge-based force, load and tension sensors
  • Galvanic Isolation minimizes the chance for signal interference, including ground faults
  • 0-10VDC analog output
  • Provides accuracy of ±0.1%
  • Operating input power supply of 19-36 VDC, non-regulated
  • Includes excellent overload and reverse-polarity protection
  • Provides a well-regulated power supply of 10 VDC for sensor

Options
In standard version the measurement amplifier offers a voltage output. The TS 621 can be extended with one additional output.
Option D 2nd voltage output 0 to ±10V
• selectable cut-off frequency
• 0.5 - 5 - 10 - 20 Hz
• setting by DIP-switches
click to view animation
   

Tension signal with a dynamic part (frequency approx. 3Hz)
Cutoff Frequency = 5Hz
Option X 2nd voltage output 0 to ±10V
• Additional amplification, selectable 2-, 3-, 4- or 5-times
• filtered (cut-off-frequency 25Hz)
• setting by DIP-switches
   
Option A Additional current output
• bipolar 0 to ±20mA
• unipolar 0 to +20mA
• unipolar 4 to +20mA
• setting by DIP-switches
   
Option TS621-AD Current output 0/4-20mA, filtered
• bipolar 0 to ±20mA
• unipolar 0 to +20mA
• unipolar 4 to +20mA
• cut-off frequency 0,5 / 5 / 10 / 20 Hz
• setting by DIP-switches

Related Products

RFS On-Line Tension Sensor


  • Resolution of 0.1% and better
  • Rugged stainless steel housing is environmentally sealed
  • Overload protection up to 800%

More details

RFS On-Line Tension Sensor

DPM502 Digital Tension Indicator


  • Selectable “damping function” reduces display fluctuations
  • 24V DC power supply with galvanic isolation

More details

DPM502 Digital Tension Indicator

HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors


  • Real time display of measured values graphically and digitally, indicating the actual value in tension units
  • Export data in ASCII format

More details

HCC-Easy Data Transfer & Analysis Program For Honigmann Tension Sensors

MU621 Tension Indicator/Amplifier Console


  • For strain gauge sensors
  • 1 to 4 measuring channels

More details

MU621 Tension Indicator/Amplifier Console

Specifications
Sensor TypesStrain Gauge, full bridge
Impedance RangeMinimum 150 Ohms
Overall Accuracy0.1% (any portion of the range)
Power Source Required19 to 36 VDC (24 VDC, typical)
Optional: 9 to 18 VDC (12 VDC, typical)
Power Supply to Sensor10 VDC, regulated (±5 VDC referenced to ground)
Calibration Range38 to 580%
Output from TS6210-10 VDC (standard)
Optional OutputsCurrent (option A), 0-20/4-20 mA, user set
Amplified voltage (option X),2X, 3X, 4X, 5X
Damped voltage (option D) at 4 seconds
Isolation between I/OGalvanic Isolation using integrated DC-DC converter between input power & output signals
Power Consumption100 mA @ 24 VDC
Operating Temperature0 to 60 °C (32 to 140 °F)
Connector TypesScrew Terminals
Dimensions3.1" (H) x 1" (W) x 3.7" (D) (80 x 25 x 95 mm)
Weight4 ounces (100 grams)
Mounting StyleDIN-Rail Snap-In Installation (DIN-rail not provided)

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
  Information