We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

For support please call
+44 (0)121 2855 222

TA200 Tachometer for capturing and display of rotational speed

High quality tachometers by IVO, available with three different supply voltages. The TA200 is equipped with a mounting plate to install the tachometer in many applications.

  • Pulse valuation can be programmed from 0.0001 to 9999.99
  • Frequencies processed up to 40 kHz Measurement according to measurement of length of period
  • Sensor logic can be programmed

Dimensions TA200

Product Configurations

Pin assignment

Block Diagram

Mechanical data
Display: 7-segment LED-display
6-digit display of real values, 14 mm high
Decimal point can be programmed
Suppression of leading zero
Operation, keypad: Front membrane with short-stroke keys
Front dimensions: DIN housing 96 x 48 mm
Mounting: Front-plate installation
Fastening: By means of clamping frame
Weight: Version AC: approx. 350 g
Version DC: approx. 250 g
Connection: Plug-in screw terminals
Grid 5.08 mm
Core cross-section: Max. 1.5 mm2
Housing material: Polycarbonate black, UL 94V-0
Front membrane: Polyester

Ambient conditions
Ambient temperature: 0...+50 °C
Storage temperature: -20...+70 °C
Relative humidity: Max. relative humidity 80 %, at 25 °C, non condensing
Protection: Front IP 65 to DIN 40050
General rating: EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2
Interference immunity: EN 50082-2
Emitted interference: EN 50081-1

Electrical data
Supply voltage: Choice of two voltages via switch on device.
Always set to higher voltage when supplied.
115 ±10% / 230 VAC ±10% (50 / 60 Hz)
24 / 48 VAC ±10% (50 / 60 Hz)
24 VDC ±10%, 5% RW
Power consumption: 7 VA, 5 W
Sensor supply: 12...26 VDC / max. 100 mA
Signal input: Comparator input
PNP, NPN, Sinus or Namur without explosion protection
Voltage level 4...40 V
Input resistance 3 kOhm
Input frequency: F1 can be programmed 40 kHz / 25 Hz
Data back-up: > 10 years via EEPROM


Request Information / Quotation

Your information/quotation request is send!


Your message was successfully sent!