We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

DXK Warp Tension Meter


Made in GermanyA reference frame makes it easy to scoop up the selected number of ends for measurement and keeps the unit perpendicular while it rests on the warp. K10, K30 & EX ranges are supplied with a 10 mm sensing pin. For the 200 and 500 range codes select either a 17 or 34 mm sensing pin.

Features
  • Width of the sensing pin 10 mm (34 mm optionally available)
  • Finger Support: We recommend mounting a finger support for higher tension ranges
  • Roller shifting mechanism ensure easy acquisition of the running material
  • Large reference frame (15 x 17 cm) is placed on the warp threads allowing the safest and most accurate measurements possible.
  • Certificate of Compliance with the order 2.1 according DIN EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according DIN EN 10204 with calibration report

Tension Ranges
ModelRanges    
DXK-300 20-300 cN     
DXK-1000 100-1000 cN     
DXK-2000 200-2000 cN     

Options
Memory Pointer (M)

Designed to retain the peak value as tensions fluctuate. Manually reset by using the knob located in the center of the dial.

Complete Kit
The KXB Tension Meter is supplied as a complete kit including meter and instruction manual in a foam-fitted hard-plastic carrying case.

Specifications
Accuracy± 1% of full scale or
± 1 graduation mark on scale
Diameter of Scale41 mm
Housing MaterialDie-cast aluminum
Temperature range50 - 113°F (10 - 45°C)
Air humidity85 % RH, max.
Housing dimensions (L x W x H)7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm)
Weight, net (gross)1 lbs (2 lbs)

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
 Information