We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

DX2F Limited Access Tension Meter


Made in GermanyLong, flat fingers and miniature V-grooved rollers are used in applications where there is limited access space or where the running filaments are close together.

Measuring Head DimensionsMeasuring Head Dimensions
Head Width (X):
38 mm
Head Length (Y): 47 mm


Features
  • 22 mm distance between outer rollers permits a narrow access "window" of only 1/2" x 1 - 1/2".
  • Rollers are rated for speeds up to 900 m/min. or, optionally, up to 2000 m/min (K).
  • Turned-up outer finger edges guide the running filament into the roller grooves, eliminating snags behind the rollers.
  • Certificate of Compliance with the order 2.1 according DIN EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according DIN EN 10204 with calibration report

Tension Ranges
model     
DX2F-3 3-30 grams     
DX2F-5 5-50 grams     
DX2F-12 10-120 grams     
DX2F-20 10-200 grams     
DX2F-30 20-300 grams     
DX2F-40 10-400 grams     
DX2F-80 100-800 grams     
DX2F-SP 50-1000 grams     
DX2F-EX 100-1000 grams     
DX2F-200 200-2000 grams     

Specifications
Accuracy± 1% of full scale or
± 1 graduation mark on scale
Diameter of Scale41 mm
Maximum Speed6000 m/min
Roller MaterialHard-coated aluminum (standard)
Hardened steel (ST)
Chromed Steel (w)
Plastic (PL)
Housing MaterialDie-cast aluminum
Dimensions225 x 90 x 44 mm
(8.6" x 3.5" x 1.7")

\n