Contact
Phone:
+44 (0)121 2855 222
Email :
sales@checkline.eu
The AD-300-L durometer with slim probe is developed for hardness measurements on irregular shapes and areas that are hard to reach.
This new durometer series is built to the highest quality standards with internal friction reduced to an absolute minimum; it enables you to take highly accurate repetitive measurements on hard to reach places.
The AD-300-L is available in 2 versions (Shore A & Shore D) in 3 different types:
The AD-300-L durometer meets the requirements of different international standards, including ASTM D 2240, DIN ISO 7619-1, ISO 868, ISO 7619-1. (With the exception of the diameter of the pressure foot because the pressure foot is not according to the national standards)
Type 1:Slim Probe 1, foot DIA. 8 mm for hard to reach areas or irregular shapes.
Type 2:Chisel shaped (angled foot) for hard to reach or narrow areas.
Type 3:Slim Probe 2, DIA. 5.0 mm.A thinner foot for reaching hard to get places or irregular shapes.
| Model | ASTM D2240 | DIN 53505 | ISO 868 | ISO 7619 | |||
|---|---|---|---|---|---|---|---|
| AD-300L-A |
|
||||||
| AD-300L-D |
| Dial diameter: | 57 mm |
| Total length: | 166 mm |
| Range: | 0 - 100 |
| Accuracy: | ± 1 |
| Resolution: | 1 |
| Drag pointer: | Optional available |
| Net weight: | 193 g |
| Standards: | DIN ISO 7619-1 ISO 868 ISO 7619-1 ASTM D 2240 (with the exception of the diameter of the pressure foot) |
