HB-TBK-D Shore Hardness Testblock Kit
The HB-TBK-D Shore Hardness Testblock Kit makes measurements possible with different levels of hardness. It can be used as a reference check and it will indicate if a durometer is operating within tolerances. The individual testblocks are marked with serial numbers to guarantee incontestable identification.
Place the durometer on the desired testblock and press on it untill its base reaches the surface. Read the measured value in accordance with the value on the test block.
This Shore Hardness Testblock kit gives the user the ability to develop the proper "feel" and will assist in helping to maintain durometer read-out accuracy for various purposes including science, manufacturing, research and development..
The hardness values range from shore 60-85.
A durometer should never be calibrated with test blocks. We therefore strongly recommend an annual calibration of the durometer.
Please contact Checkline Europe for an anual calibration.
- According to DIN ISO 7619-1
- 3 test blocks:
shore range 60 to 85 - Calibration Certificate
- 54 mm x 54 mm x 8 mm
The HB-TBK-D Testblock kit comes with:
- 3 Testblocks 60, 75, 85
- Calibration Certificate
- User Manual
- Plastic case with foam padding
Cic-Duro Durometer Calibration
- Exclusively NIST-certified testing equipment
- Possibility to adjust and repair
More details
| Norm | according to DIN ISO 7619-1 |
| Dimensions | Ø 5mm x 9mm |
| Range | Shore D 60,75 and 85 |
| Weight | Appr. 250 gram |