The HB-TBK-A Shore Hardness Testblock Kit
makes measurements possible with different values of hardness. Used as a reference check it will indicate if a durometer is operating within tolerances. The individual testblocks are marked with serial numbers to guarantee incontestable identification.
Place the durometer on the desired testblock and press on it untill its base reaches the surface. Read the measured value in accordance with the value on the test block.
This Shore Hardness Testblock kit
gives the user the ability to develop the proper "feel" and will assist in helping to maintain durometer read-out accuracy for various purposes including science, manufacturing, research and development..
The hardness values range from shore 30 to shore 90.
A durometer should never be calibrated with test blocks. We therefore strongly recommend an annual calibration of the durometer.
Please contact Checkline Europe
for an anual calibration.