DTFB - DTFX Digital Tension meter with large rollers

Made in Germany Digital Tension meter with large rollers to minimize bending of sensitive materials like fiber optics, carbon and technical fibers.
The model DTFB is recommended where the DTMB cannot be used.
The DTFX is can be used in places where the DTMX cannot be used.

Note: This model does not include a material thickness compensator.

Features

Large, V-grooved guide rollers with 32 mm groove diameter, ball-bearing mounted
Special guides on the bracket assembly permit easy material acquisition
Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Rugged aluminium housing
Specific Test Report with calibration report optionally available
Large bending radius assures gentle handling of the material being measured
Everything in operator's view:
- the guide rollers
- the measured material
- the readings
Ball-bearing mounted, V-grooved guide rollers
Battery operated (AC adapter for continuous operation available)

Tension Ranges

Model	Ranges	SCHMIDT Calibration Material**	Resolution	Measuring Head Width*
DTFB-200	2 - 200 cN	PA: 0.12 mm Ø	0.1 cN	140
DTFB-500	5 - 500 cN	PA: 0.20 mm Ø	0.1 cN	140
DTFB-1000	50 - 1000 cN	PA: 0.30 mm Ø	0.1 cN	140
DTFX-200	2 - 200 cN	PA: 0.12 mm Ø	0.1 cN	140
DTFX-500	5 - 500 cN	PA: 0.20 mm Ø	0.1 cN	140
DTFX-1000	50 - 1000 cN	PA: 0.30 mm Ø	0.1 cN	140
Other units of measure available, such as g. ** Suitable for 95% of applications - PA = Polyamide Monofilament Measuring Head Width* 140 mm (Outer distance between outside guide rollers) Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied.

Guide Rollers

Order Code	Line Speed ...m/min	Roller Material
Standard	4000	Hardcoated aluminium
Code T	4000	plastic red (PVC)

Complete Kit

Delivery includes:
Tension meter with carrying case and batteries, operating instructions in English or German as requested

Specifications

	Model DTFB:
Calibration:	According to SCHMIDT factory procedure
Accuracy:	for 10% to 90% of range: ± 0.5% full scale and ± 1 digit remaining range and other calibration material: ± 3% full scale and ± 1 digit
Overrange:	Approx. 15% full scale, without accuracy guarantee
Overload protection:	100% of tension range
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	0.2 mm max.
Signal processing:	Digital
Measuring frequency:	62 measurements/sec
Converter:	12 bit A/D
Temperature coefficient:	Gain: less than ± 0.01% full scale/°C Zero point: less than ± 0.3% full scale/°C
Display:	4-digit LCD, 12 mm high
Display update rate:	0.5,1,2 or 4 seconds selectable
Memory:	Last, MIN, MAX, PEAK values
Field adjustment:	± 7 steps in 1.5% increments
Temperature range:	10 - 45ºC
Air humidity:	85% RH, max.
Power supply:	4 size AA batteries 1.5 V (about 20 hours of continuous use)
Auto power off:	After 2 minutes of non-use
Housing material:	Die-cast aluminium
Housing dimensions:	235 x 76 x 45 mm (L x W x H)
Weight, net (gross):	approx. 680 g (1500 g)
	Specifications for Model DTFX, same as Model DTFB plus:
Extended memory:	up to 100 tension values, average, standard deviation
Digital output:	RS232C (4800, 8, N, 2)
Analog output:	0-1 V DC (conversion rate 16 ms)
Digimatic:	Mitutoyo