We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

PZX-7 Precision Ultrasonic Wall Thickness Gauge

The PZX-7 is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. The housings is made of sturdy extruded aluminum with sealing for perfect protection assuring even in high-demanding field and production environments.

Measuring range:

Range with Standard Delay Line Transducer
0.150 - 25.40 mm

Range with Contact Transducers
up to 915.0 mm

With a single element delay tip transducer, the PZX-7 Precision Ultrasonic Wall Thickness Gauge will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E) when measuring thicker materials. The Plastic Mode (PLAS) is used for measuring thickness of plastic in combination with the option Graphite Delay Line Tip.

The PZX-7 can also be used with single element contact transducers for wall thickness measurements up to 923 mm. This gauge has a USB port enabling data transfer in single values (value on the display) is possible via the to a PC or compatible data collector. The PZX-7 Precision Ultrasonic Wall Thickness Gauge i comes with a guarantee of 5 years.

  • Measuring range on steel:
    0.15-25.40 mm with standard delay line transducer
  • Resolution of 0.001 mm
  • Measuring unit switchable between mm and inch
  • High visibility LCD Display is readable in all lighting conditions and temps as low -30 °C
  • Selectable Backlight ON/OFF/AUTO
  • Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
  • 5 Year Warranty

Delay Line Tips for PZX-7

Complete Kit
The PZX-7 is supplied as a complete kit
  • with the gauge,
  • probe,
  • 120 ml bottle of coupling fluid,
  • USB-C Data transfer cable,
  • 2x AA batteries,
  • NIST Traceable Calibration Certificate
  • and Instruction Manual - all in a foam-fitted carrying case.

Related Products

TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge

  • Multiple calibration options: One Point, Two Point, or selection from a Material List.
  • 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.
  • Hardware AGC gain control for multiple echo and thru-paint measurement.

More details

TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge

A-302-6002 Protection for TI series gauges

More details

A-302-6002 Protection for TI series gauges

Category Ultrasonic Thickness Gauge Accessories

More details

Category  Ultrasonic Thickness Gauge Accessories Ultrasonic Thickness Gauge Accessories

Measurement range with standard probe: 0.15-25.40 mm with standard delay line transducer in steel
Probe (standard):1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507)
Velocity Range:305 to 18,542 m/sec
Resolution:0.001 mm. 0.01 mm user-selected units and resolution
Display:Multi-function 7 segment 4.5 digit liquid crystal display with Back-light
Pulse Repetition Frequency (PRF):200 pulses/sec
Measurement modes:Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
Cable length:1.2 m
Display refresh rate:10 updates/sec
Battery Type:2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used)
Battery Life:35 hours on alkaline and 18 hours on NiCad
Housing:Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing Protection:IP65
Weight:308 grams
Dimensions:64 x 131 x 32 mm
Certificates:NIST Traceable
Guarantee:Gauge: 5
Probes: 90 Days

Buy Now

PZX-7 - High Precision Wall Thickness Gauge
€ 2.047,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.