The WTT pull-out force gauge accurately measures the force (up to 100kg) needed to loosen lugs. The system consists of a manual dynamometer, a digital force gauge and special cable brackets suitable for cable diameters up to 6 mm (0.24 ").
The wheel is attached to the top of the test bench so that the the test bench can be controlled with the highest level of precision, thus enabling very exact force measurements of up to 100 kg or 1000 N.
The digital force measuring device used in this system collects the measured data and displays it clearly on an LCD display. In addition, it has the option of setting maximum and minimum values for a series of measurements in "Preset mode" and of being alerted by audible and visual signals if these values are exceeded. Data output ports USB and RS-232 enable together with the included data software that the data can be directly transferred to a computer.
The WTT pull-out force gauge is delivered in a kit consisting of:
|Capacity:||WTT-100: 50 kg / 500 N / 110 Lb |
WTT-200: 100 kg / 1000 N / 220 Lb
|Resolution:||WTT-100: 0.01 kg / 0.01 N / 0.1 Lb |
WTT-200: 0.1 kg / 0.1 N / 0.1 Lb
|Precision:||± 0.3% of the full scale|
|Hub:||230mm without attachments|
|Overload capacity:||150% of the final scale value (LCD display flashes from a load of 110% of the maximum value)|
|Refresh rate display:||10 times/second|
|Data memory:||500 measurement values|
|Power supply:||Rechargeable Ni-MH battery, universal charger optional|
|Battery life:||Approximately 16 hours continuous use at full charge|
|Data output:||USB, RS-232|
|Operating temperature:||-10° - 40°C|
|Dimensions:||250 x 196 x 445 mm|