We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact
Contact Us
Checkline Europe
Chat function is not available since you have not allowed us to use tracking cookies.

TI-25P Programmable Ultrasonic Wall Thickness Gauge


The TI-25P Programmable Ultrasonic Wall Thickness Gauge is no longer available and has been replaced by TI-25PX.
Click here to see the TI-25PX.


Made in the USA Measuring Range in Steel
1.00 - 150.0 mm
0.040 - 6.000 inches

With the CHECK-LINE TI-25P Wall Thickness Gauge you can measure accurately the thickness of walls and the extent of corrosion from only one side!
When only one material is being tested then the TI-25P is the perfect choice because it holds a single ultrasonic velocity. You can start working right away because the velocity has been preset in the gauge.

The TI-25P has a Standard configuration: It is factory set to measure steel.

Additionally we offer the possibility to program the TI-25P to measure any other single material instead of steel. To be able to perform this optional configuration: Checkline Europe needs a sample of the material to be measured or the exact sound velocity of the material must be known.
 


Features
  • Switch-selected units for inches or mm
  • Resolution of 0.01 mm (0.001 inch)
  • The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
  • Special-purpose probes are offered for a variety of applications
  • The TI-25P probe is waterproof and can be submerged in water
  • Large, backlit LCD display retains last reading
  • For underwater surveying, probe cable lengths up to 15 meter are optionally
  • Comes complete with cable and software to transfer the velocity to the gauge.

Typical Applications
Typical Applications

Accesories

TI-SB Steel Test Block with NIST-Traceable Certificate


  • Precision Machined and Finished
  • Includes NIST Report and Test Data

More details

TI-SB Steel Test Block with NIST-Traceable Certificate 125793

TI-SB4 Uncertified Steel Test Block


  • Uncertified Steel Test Block
  • For convenient confirmation of thickness gauge calibration

More details

TI-SB4 Uncertified Steel Test Block 126277

TICC-M Protective Holder for Ultrasonic Gauges


  • Constructed from heavy duty Cordura Nylon
  • Belt loop included
  • Includes wrist & shoulder straps

More details

TICC-M Protective Holder for Ultrasonic Gauges 125807

CF-AN Coupling Fluid


  • Used to create an ultrasonic coupling between the probe and material to be measured
  • Available in different quantities - 125ml / 250ml / 500ml / 1ltr / 5ltr / 25ltr

More details

CF-AN Coupling Fluid 126455

TI-25-UW-50 50 Foot (15 m) Underwater Probe / Cable Assembly


  • 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors.
  • 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications.

More details

TI-25-UW-50 50 Foot (15 m) Underwater Probe / Cable Assembly 126123

TI-V-BLOCK Transducer Holder


  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
    For 3/16" & 1/4" Transducers only.

More details

TI-V-BLOCK Transducer Holder 126200

N-306-0010 RS232 (DB-9 to Lemo) Data Cable 182cm


  • RS232 (DB-9 to Lemo) Data Cable 182cm

More details

N-306-0010 RS232 (DB-9 to Lemo) Data Cable 182cm 126320

CF-4H High Temperature Coupling Fluid


  • Temperature Range: -18° to 316° C

More details

CF-4H High Temperature Coupling Fluid 126919

CF-4H-950F Coupling fluid for high temperatures


  • Temperature range from 316ºC to 404 ºC

More details

CF-4H-950F Coupling fluid for high temperatures 127149

Cic-Wall Wall Thickness Gauge Calibration


  • Easy planning of calibration
  • Short turnaround
  • Exclusively in accordance with DIN 55 350 Part 18, § 4.2.2, DIN ISO 8402 Part 1
  • Possibility to adjust and repair

More details

Cic-Wall Wall Thickness Gauge Calibration  127035

Measuring Limits
Minimum Radius for Convex Surfaces Minimum Radius for Convex Surfaces 8.89 mm
Minimum Radius for Concave Surfaces 76.2 mm
Minimum Radius for Concave Surfaces Minimum Headroom 25.4 mm
Minimum Sample Diameter Minimum Sample Diameter 3.8 mm
Minimum Substrate Thickness - F Minimum Substrate Thickness - F NA
Minimum Substrate Thickness - NFe NA

Specifications
Range in Steel 1.00-150.0 mm (0.040-6.000") with supplied probe. Other probes available.
Resolution 0.01 millimeter (0.001 inch)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 1250 to 10.000 meters/sec (.0492 to .3937 in/µs)
Probe 1/4", 5 MHz, actual wearface is 17mm (5/8")
Probe Wearface PEEK (Polyethylethylkytone)
Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
Temp. Limits Ambient: -30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (0 to 200° F)
Special high temperature probes are optionally available
Battery Type Two AA batteries
Battery Life 200 hours
Weight 280 g (710 ounces)
Dimensions 64 x 114 x 32mm (2.5 x 4.5 x 1.25")
Software Comes complete with cable and software to transfer the velocity to the gauge.
Accessories Probe/cable assembly, 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.

Complete Kit
The TI-25P is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

For setting the ultrasonic velocity, a connection cable and software are supplied

Downloads