TI-25MXT Ultrasound wall thickness gauge
This robust TI-25MXT Wall Thickness Gauge measures through paint and coatings via ultrasound and is ideal for the use on materials such as steel and other metals, glass, ceramics, plastics and many others.
The TI-25MXT housing is made of extruded aluminium and its control panel is sealed and resistant to water and petroleum products, making it the perfect tool to resist demanding industrial and production plant conditions. Furthermore, measurements by the means of ultrasound allow to access locations that are only accessible from one side or difficult to reach areas.
The above mentioned features are essential for a continuous run of the machines in production and thus for the prevention of a costly shutdown. Our confidence in our equipment is underlined by the 5-year warranty on the gauge.
To be able to measure the thickness of coated or painted materials reliably & accuratly, two easily switchable measurement modes give the TI-25MXT the ability to cancel out the layer thickness: the Pulse-Echo mode and the Echo-Echo mode:
*Pulse-Echo mode for uncoated materials: Measuring range: 0.63 - 1219 mm (depending on the test head and material):
This mode determines the wall thickness and checks large areas for flaws.
*Echo-echo mode (multiple echo) for measurements by coating: Measuring range: 2.54 - 152.4 mm and a maximum coating of 1.9 mm:
This mode allows for the coating layer thickness to be automatically determined and cancelled out by the device. The measured value for the substrate is immediately displayed, without the need for complicated conversion calculations.
- Measurements in pulse echo or echo-echo mode
- Compact measuring device for determining the material thickness while suppressing the layer thickness
- Illuminated LCD display with status bar for signal quality indication
- Resolution: 0,01 mm
- NIST traceable calibration certificate included
- IP65 protection class
- 5 years warranty
|
Minimum Radius for Convex Surfaces | 8.89 mm |
| Minimum Radius for Concave Surfaces | 76.2 mm | |
 |
Minimum Headroom | 25.0 mm |
 |
Minimum Sample Diameter | 3.8 mm |
 |
Minimum Substrate Thickness - F | na |
| Minimum Substrate Thickness - NFe | na |
Zeroing:
Automatic or manual zeroing of the test head
Probe diameter:
Specify the probe diameter for increased linearity.
High-speed surface scan:
Shows the lowest value detected during a 100 Hz scan.
Differential mode:
Displays ± deviation from an entered nominal value.
Alarm Mode:
Adjustable maximum and minimum limits. Limit indicated by a visual and an audible alarm.
The TI-25MXT is delivered in a complete set, consisting of:
- TI-25MXT ultrasonic wall thickness gauge
- Ultrasonic probe for coated materials
- 120 ml coupling fluid
- NIST traceable calibration certificate
- 2 AA batteries
- Operation manual
TI-SB Steel Test Block with NIST-Traceable Certificate
- Precision Machined and Finished
- Includes NIST Report and Test Data
More details
TI-SB4 Uncertified Steel Test Block
- Uncertified Steel Test Block
- For convenient confirmation of thickness gauge calibration
More details
| Measurement range: | Pulse Echo: 0.63 - 1219 mm (depending on material and probe) Echo Echo: 2.54 - 152.4 mm |
| Resolution: | 0.01 mm |
| Maximum layer thickness: | 1.9 mm |
| Display: | Large LCD display with 4.5 digits each 1.3 cm high -Adjustable backlight -Division into individual segments clear reproduction of advanced information |
| Update rate display: | 10 Hz |
| Sound velocity: | Adjustable from 305 - 18,542 m / s |
| Gain: | 40-52 dB range in 3dB steps |
| Time-dependent gain: | Usable in P-E and E-E mode depending on probe and frequency |
| Probe: | Usable with 1-10 MHz dual-element probes |
| Probe cable: | Waterproof cable with unpolarized connections, 1.2m length |
| Power supply: | 2x 1.5V alkaline, 1.2V NiCad and 1.5V lithium AA batteries |
| Housing dimensions: | 63.5 x 31.5 x 131.3mm (LxWxH) |
| Operating temperatur: | -30 - 75°C |