We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact
Contact Us
Checkline Europe
Chat function is not available since you have not allowed us to use tracking cookies.

TI-25M-MMX Through Paint Ultrasonic Wall Thickness Gauge


Made in the USA Measuring Range:
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.63 to 500 millimeters (0.025 to 19.999 inches).
Echo-Echo Mode (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch).

The TI-25M-MMX precisely measures wall thickness of all metals, ceramics, glass and most rigid plastics and the extent of corrosion - from only one side!

The TI-25M-MMX has 2 measuring modes: Single Thickness Reading mode which measures the thickness on one point and the Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then.

The probe of the TI-25M-MMX wall thickness gauge is waterproof and can also be submerged in water. It is ideal to use in tough field conditions because the gauge is impact-resistant and environmentally sealed..
 


Features
  • Resolution of 0.01 mm (0.001 inch)
  • Simple operator controls virtually eliminate training
  • Ability to measure through paint and eliminate coatings
  • Large, backlit LCD display retains last reading
  • Switch-selected units for inches or mm
  • CE Certified
  • Special-purpose probes are offered for a variety of applications
  • Includes NIST-Traceable Calibration Certificate

Typical Applications
Typical Applications

Accesories

TI-SB Steel Test Block with NIST-Traceable Certificate


  • Precision Machined and Finished
  • Includes NIST Report and Test Data

More details

TI-SB Steel Test Block with NIST-Traceable Certificate 125793

TI-SB4 Uncertified Steel Test Block


  • Uncertified Steel Test Block
  • For convenient confirmation of thickness gauge calibration

More details

TI-SB4 Uncertified Steel Test Block 126277

CF-AN Coupling Fluid


  • Used to create an ultrasonic coupling between the probe and material to be measured
  • Available in different quantities - 125ml / 250ml / 500ml / 1ltr / 5ltr / 25ltr

More details

CF-AN Coupling Fluid 126455

TI-V-BLOCK Transducer Holder


  • The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
    For 3/16" & 1/4" Transducers only.

More details

TI-V-BLOCK Transducer Holder 126200

Cic-Wall Wall Thickness Gauge Calibration


  • Easy planning of calibration
  • Short turnaround
  • Exclusively in accordance with DIN 55 350 Part 18, § 4.2.2, DIN ISO 8402 Part 1
  • Possibility to adjust and repair

More details

Cic-Wall Wall Thickness Gauge Calibration  127035

Model Selection Guide
Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode
Model Number Maximum Coating Minimum Wall Maximum Wall
All Models 0.50 mm (0.020") 2.54 mm (0.100") 152.4 mm (6.000")
Selection Guide - Thru-Paint (Echo-Echo) Model
Model Number Maximum Coating Minimum Wall Maximum Wall
TI-25M-MMX 1.00mm (0.040") 2.54mm (0.100") 25.4mm (1.000")
TI-25M-MMX-EXT 2.00mm (0.080") 5.08mm (0.200") 127.0mm (5.000")

Measuring Limits
Minimum Radius for Convex Surfaces Minimum Radius for Convex Surfaces 8.89 mm
Minimum Radius for Concave Surfaces 76.2 mm
Minimum Radius for Concave Surfaces Minimum Headroom 25.4 mm
Minimum Sample Diameter Minimum Sample Diameter 3.8 mm
Minimum Substrate Thickness - F Minimum Substrate Thickness - F NA
Minimum Substrate Thickness - NFe NA

Specifications
Range <b>Pulse-Echo Mode</b> (Pit & Flaw Detection) measures from 0.63 to 500 millimeters (0.025 to 19.999 inches).
<b> Echo-Echo Mode </b> (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch).
Resolution 0.01 mm (.001")
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 1250 to 10.000 meters/second (0.0492 to .3937 in./µs.)
Probe 5 MHz, 6.35 mm Diameter (0.25")
Probe Wearface PEEK (Polyethlethylketone)
Cable 1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m. (50 ft.)
Temp. Limits Ambient:-30 to 50° C (-20 to 120° F)
Material: -20 to 100° C (0 to 200° F)
Special high temperature probes are optionally available
Battery Type Two AA batteries
Battery Life 200 hours
Weight 196 g (7 ounces)
Size 64 x 114 x 32 mm
(2.5 x 4.5 x 1.25")
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty <u>Gauge</u>: 5 Years<BR><u>Probes</u>: 90 Days

Downloads

Complete Kit

The TI-25M-MMX is supplied as a complete kit with:

  • the gauge
  • probe
  • 4 oz. bottle of coupling fluid
  • 2 AA batteries
  • NIST Calibration Certificate
  • Operating Instruction Manual


 all in a foam-fitted carrying case.



Buy Now
Products

Product name
Price
Quantity
TI-25M-MMX Complete kit
£ 1.325,00 
TI-25M-MMX-EXT Complete kit
£ 1.325,00 
TI-25M-MMX-H High Temp Wall Thickness Gauge
£ 1.419,00 
 
Accessories

Product name
Price
Quantity
TICC-M - Protective holder
£ 57,00 
CF-AN-250ml Coupling Fluid 250ml Bottle
£ 15,00 
Calibration Certificate - Calibration Inspection Certificate
£ 90,00 
V-Block Transducer Holder
£ 177,00 
TI-SB4 - Uncertified Steel Testblock
£ 127,00 
TI-SB-4H - Steel Test Block
£ 347,00 
TI-SB-4L - Steel Test Block
£ 347,00 
TI-SB-5L - Certified Steel Test Step Block
£ 347,00 
T-102-2700 - 5 MHz MMX Probe 1/
£ 307,00 
T-104-9700 - Spare / Replacement Probe for TI-25M-MMX-EXT
£ 322,00 
T-104-2700 - 1/2" 5MHz Dual Element Hi Damped Transducer
£ 322,00 
T-102-2000 - 5 MHz Probe 1/4"
£ 267,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability : Available , preorder 1-2 weeks , special order, request