Measuring Range 0.60 - 150.0 mm 0.025 - 6.00 inches
The TI-25DL precisely measures wall thickness of all metals, ceramics, glass and most rigid plastics and the extent of corrosion - from only one side!
The gauge has a built-in memory for 1000 data points that can be separated into 10 separate "batches". You can download the stored data to a serial printer or PC and with no additional costs a Windows compatible data transfer program is supplied.
The TI-25DL has 3 measuring modes: Single Thickness Reading mode which measures the thickness on one point. The Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then. The third measuring mode is the Differential mode which displays the difference ("+" or "-") from a set of "nominal" value.
RS-232C Serial output for downloading stored data to a printer or computer
Large, backlit LCD display retains last reading
Resolution of 0.001" (0.01 mm)
Selectable units of inch or mm
Special-purpose probes are offered for a variety of applications
Memory for 1000 data points in up to 10 batches
Windows compatible data transfer program supplied at no additional cost
Includes NIST Calibration Certificate
TI-SB Steel Test Block with NIST-Traceable Certificate
The TI-25DL is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.
Range in Steel
0.025-6.00" (0.60-150.0 mm)
.001" (0.01 mm)
2000-10.000 m/sec. (6.500-33.000 ft./sec.)
4½ - Digit, 0.5" Backlit LCD
7.5 MHz, 0.25" Diameter (6.35 mm)
1.2 m (4 ft. ) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.).
RS-232C (8, N, 1, user-set baud rate)
Ambient: -30 to 50° C (-20 to 120° F ) Material: -20 to 100° C (0 to 200° F ) Special high temperature probes are optionally available.
Two AA batteries
7 ounces (196 g)
Gauge: 5 Years Probes: 90 Days
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.