We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

Tramex Hygro-I RH Probe Tramex Hygro-i2 Relative Humidity Probe for MRHIII & CMEXII


When the Tramex Hygro-i2 Probe is plugged into the MRHIII or CMEXpertII, the instrument automatically changes to Hygrometer Mode. The Tramex Hygro-i2 Probe provides the ideal solution for measurement of humidity, temperature and dew-point in structural materials such as concrete flooring, walls, etc., as well as the environmental conditions.

The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals.

The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind to a whole new level.

Hygro-i2 Probes are available in packs 1, 3, 6, 12 and, 25. Product Codes HIPP1, HIPP3, HIPP6, HIPP12, HIPP25.

Used in conjunction with the Tramex CMEX5, CMEX2, MRH3 non-destructive moisture meters or the Feedback Datalogger DL-RHTX, the Hygro-i2 ® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.

The Hygro-i2 ® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the calibration check salts.

Please note that the RHIE2 Electronic Interface Cable is needed to connect the Hygro-i2 Probe.

 


Features
  • Fast acclimation time
  • Reusable Hygro-i2® Relative Humidity sensors prove to be the lowest cost per BS 8201, 8203, 5325 and ASTM F2170 test
  • Best in class accuracy, even at high RH >90%
  • Proven robustness, durability and reliability
  • Accurate, durable and best in class
  • Testing per BS 8201, 8203, 5325 and ASTM F2170, giving in situ relative humidity and ambient RH, temperature, dew point temperature & grains per pound
  • Relative Humidity range: 0% to 100%
  • Fastest Temperature response time
  • Best temperature accuracy of +/-2º over 0ºC to 90 ºC
  • Temperature Range: -40ºC to 125ºC

Related Products

Tramex MRH III Digital Moisture & Humidity Meter


  • Digital, non destructive meter.
  • Specific Gravity adjustment for most wood species.
  • Deep signal penetration up to over 1" into the materials being tested without the need to damage the surface.
  • Wide range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.

More details

Tramex MRH III Digital Moisture & Humidity Meter

Tramex CMEXpert II Digital Concrete Moisture Meter


  • Measures up to 6.9% moisture content in concrete
  • Measures from 7% to 40% moisture content in wood
  • "Hold" function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible

More details

Tramex CMEXpert II Digital Concrete Moisture Meter

CMEX5 Digital Multi Moisture Meter for Concrete


  • Non-destructive quantitative %MC
  • 4 different measurement modes
  • 5 NDT Scales: Concrete MC, CM Concrete (Carbide Method equivalent for concrete), CM Anhydrite/Gypsum, Gypsum Ref 0-12 and a Reference scale

More details

CMEX5 Digital Multi Moisture Meter for Concrete

Specifications
Range:0 to 100%RH
Accuracy:0% to 99%RH ±2.0%RH @ 25ºC
Resolution:0.1% over the complete range
Drift:<0.25%RH per year
Range:-40ºC to 125ºC
Accuracy:±0.1 °C Range 20°C to 60°C
Sensor Protection:PTFE Film protects sensor opening from water & dust

Accessories

Tramex Electronic Interface Tramex Hygro-i2 Electronic Interface Connects Hygro-i2 probes


  • RHIE2 with Din Connection for use with CMEX2 and MRH3
  • RHIE2B with Bayonet Connection for use with Feedback Datalogger RHTX and CMEX5

More details

Tramex Electronic Interface Tramex Hygro-i2 Electronic Interface Connects Hygro-i2 probes 127012

Buy Now
Products

Product
Price
Quantity
133616
HIPP1 - Tramex Hygro-i2 Probe - Pack of 1
€ 110,00 
133522
HIPP3 - Tramex Hygro-i2 Probe - Pack of 3
€ 290,00 
133523
HIPP12 - Tramex Hygro-i2 Probe - Pack of 12
€ 930,00 
 
Accessories

Product
Price
Quantity
133529
RHIE2 - Tramex Hygro-i2 Electronic Interface Connects Hygro-i2 probes to MRH3 & CMEX2
€ 75,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

\n