The new Check-Line DTL Digital Torque Wrench measures the application and remove torque. It is versatile and provides easy and precise measurements in industrial, automotive, aerospace and many other applications. The DTL-50i or the DTL-100i Digital Torque Wrench displays torque in either real-time or peak mode, on a large LCD display in selectable Lb-in, N-m, ft-lb or Kg-cm units. The DTL-wrench features a programmable target set point that indicates the desired torque value with red and green LEDs combined with an audible beep.
Model | Capacity | Resolution | ||
DTL-50i | 10,62 - 53,1 Lb-in | 0,01 Lb-in | ||
1,2 - 6,00 N-m | 0,001 N-m | |||
0,88 - 4,4 Lb-ft | 0,001 Lb-ft | |||
12,2 - 61 Kg-cm | 0,01 Kg-cm | |||
DTL-100i | 21,24 - 106,2 Lb-in | 0,1 Lb-in | ||
2,4 - 12,00 Nm | 0,01 Nm | |||
1,77 - 8,85 Lb-ft | 0,01 Lb-ft | |||
24,48 - 122,4 Kg-cm | 0,1 Kg-cm | |||
DTL-175i | 35,4- 177,0 Lb-in | 0,1 Lb-in | ||
4,0 - 20,00 Nm | 0,01 Lb-ft | |||
2,95 - 14,75 Lb-ft | 0,01 Nm | |||
40,82 - 204,1 Kg-cm | 0,1 Kg-cm |
The DTL is supplied as a complete kit including the wrench, 1 AAA battery, instruction manual and calibration cert in a fitted plastic carrying case.
Accuracy | CW ±3% / CCW ±4% (20 - 100% of capacity) |
Memory | 50 Readings for recall on display, no output capability |
Operation Mode | Peak hold/ Track |
Unit Selection | ft-lb, in-lb, N-m, Kg-cm |
Length | 8 inches / 20 mm |
Head Type | Lever type Ratchet |
Battery | 1 AAA |
Battery Life | 12 Continuous Hours 1 Year Standby |
Operating Temperature | -10°C ~ 60°C |
Storage Temperature | -20°C ~ 70°C |
Humidity | Up to 90% non-condensing |
Warranty | 1 Year |