The Checkline TT-CA Radius Arms are designed for calibration and verification of torque measuring equipment.
The radius arms are available in 2 versions:
- High Accuracy Arms are for use with +/-0.25% tolerance transducers
- Standard Accuracy Arms are for use with +/-0.5% tolerance transducers.
High Accuracy version: 0.025% Accuracy
Standard version: 0.625% Accuracy
These radius arms are used by Metrology Labs and Quality Control (QC) Departments to test and adjust torque torque transducers and sensors.
We offer a range of arms from 10 to 100 cm in length to calibrate equipment up to 1500 N-m.
The Checkline TT-CA Radius Arms include single weight pans.
Standard operating procedure is to install the arm, attach the weight pan then zero out the weight pan. The TT-CA calibration arms also include a wire with a loop on each side so you can supply your own certified hanger with slotted weights.
Note: Weights sold separately and are not available from Checkline.
|TT-CA-.1MA||0,10 meter||11 N-m||1/4" female square||0,025%|
|TT-CA-.25MA||0,25 meter||340 N-m||1/2" female square||0,025%|
|TT-CA-.5MA||0,50 meter||750 N-m||1" female square||0,025%|
|TT-CA-1MA||1,00 meter||2000 N-m||1.5" female square||0,025%|
|TT-CA-.1M||0,10 meter||11 N-m||1/4" female square||0,625%|
|TT-CA-.25M||0,25 meter||340 N-m||1/2" female square||0,625%|
|TT-CA-.5M||0,50 meter||750 N-m||1" female square||0,625%|
|TT-CA-1M||1,00 meter||1500 N-m||1.5" female square||0,625%|