We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

For support please call
+44 (0)121 2855 222

TSB2 Tension Sensor

Tension meter for continuous measuring low and high tensions of textile ribbons, films, foils, fibre bunches etc.

Tape rollers mounted on both sides, max. width 100 mm with several tension ranges up to 100Kg.

Tension meter is available with digital output for data processing with PC

  • Dual-flanged outer guide rollers with various widths from 10 mm up to 100 mm
  • Various output signals:
    - analog (0-1V DC)
    - RS232 (optional)
    - 0-10V DC (optional)
  • Cylindrical tape roller, ball-bearing mounted
  • Integrated measuring amplifier
  • Easy calibration to customized material by operator
  • Rugged aluminum housing
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
  • Optional hand-wheel feature to open/close roller system for easy threading of material

Tension Ranges
Model Ranges Roller Width (mm)   
TSB2-1000 0 - 1000 g 30, 36, 41, 50, 100   
TSB2-2000 0-2000 g 30, 36, 41, 50, 100   
TSB2-5000 0-5000 g 10, 15, 20, 30, 36, 41, 50, 100   
TSB2-10K 0-10 Kg 10, 15, 20, 30, 36, 41, 50, 100   
TSB2-20K 0-20 Kg 10, 15, 20, 30, 36, 41, 50, 100   
TSB2-50K 0-50 Kg 10, 15, 20, 30, 36, 41, 50, 100   
TSB2-100K 0-100 Kg 10, 15, 20, 30, 36, 41, 50, 100**   
Important for your order: Please specify model and roller width! Small dual-flanged outer guide rollers are standard. All 3 rollers can be equipped with one flange, if the material to be measured is wider than the rollers. Please request when you order.

Calibration to customized material:If process material differs significantly from the manufacturers calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

Dimensions TSB2

Related Products

SCD-1 Display Unit

  • Connecting sensors of series TS and FS with output signal 0 - 1 V

More details

SCD-1 Display Unit

Complete Kit
If sensor is ordered only: 1 diode male plug without connecting cable

If sensor and display unit is ordered: 1 connecting cable, tension sensor with packaging, operating instructions, and Certificate of Compliance with the order 2.1 according EN 10204 free of charge


Accuracy ±1 % full scale ±1 digit other calibration material: ±3 % full scale or better
Overload protection 100% of tension range
Measuring roller deflection Max. 0.5 mm
Measuring principle Strain gauge bridge
Natural frequency Approx. 500 Hz, depending on tension range
Temperature drift less than ±0.05 % fullscale/ºC
Output signal Standard: 0 - 1 V DC (analog) impedance: ≥ 5 kΩ
Option: 0 - 10 V DC (analog), or 4-20 mA (current) digital RS 232
Signal processing: Analog (option: digital)
Damping (fg) Standard: 30 Hz (other values on request)
Temperature range 10 - 45 ºC
Air humidity 85 % RH, max.
Power supply +12 - 24 V DC, max. 50 mA regulated
Housing material Aluminium
Weight, net (gross) E. g. model TSB2-2000-50 approx. 1000g (1400 g)

Request Information / Quotation

Your information/quotation request is send!


Your message was successfully sent!