We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

DT-365 LED Stroboscope IP65 DT-365 LED Stroboscope (Battery Powered & IP65)

The DT-365 LED Stroboscope IP65 DT-365 LED Stroboscope (Battery Powered & IP65) is no longer available and has been replaced by DT-366.
Click here to see the DT-366.

The DT-365 High-Intensity LED Stroboscope with integrated rechargeable battery is a velocity analyzing and measuring device that is ideal for machinery process inspection.

The DT-365 Stroboscope is capable of flashing its LED lights in a synchronous frequency to the operating machinery, creating the illusion of viewing slowed or frozen images. Utilizing this phenomenon of slowing or stopping the motion with the adjusted flash rate of its LED lights, machine parts and processes may be inspected for defects, aiding in preventative maintenance programs.
The DT-365's LED technology extends operation due to the low energy requirement of the light diodes compared with xenon stroboscopes. Maintenance time and down time is reduced since there is no need to replace the bulb typical of xenon lit stroboscopes.
The light output (Lux) of the LED array is far brighter than not only xenon powered stroboscopes, but all comparable LED stroboscopes on the market.

Typical applications for using the DT-365 is to determine speeds, inspect rotors, meshing gears, vibration diagnostic equipment, textile equipment, printing production lines, industrial fan inspection and many more.

The DT-365 has a vibrant red LED display that is ideal for viewing in dark locations. The simple to use keypad plus rate adjustment dial aids in making quick changes of the flash rate to coincide with changes in the speed of your process. The dial allows fine-tune altering of the flash rate while the x2/÷2 keys enable large spanning over the entire flash range.

The DT-365 has the added feature of modifying the flash duration or on time which aids in picture clarity often necessary in printing processes. The phase shift function is ideal for rotating equipment where the user needs to change the focus on different blades, gears, or section of the machinery.
The DT-365 is also capable of being synchronized with an input signal. To complete the system, the DT-365 has a power output to supply an input sensor if desired. The robust aluminum housing is NEMA4X (IP65) protected allowing usage in many harsh plant environments.

The DT-365 stroboscope is only available with a US plug and is not CE certified.

  • Bright LED display and simple controls aid in user operation
  • Flash controller dial permits accurate adjustments to the flash rate
  • LED technology greatly extends operation life and eliminates need to replace burned out bulbs
  • Included Accessories: Input Signal Connector, flash-light style attachable handle
  • Extraordinary durability with extruded aluminum, NEMA 4X (IP65) construction
  • Phase shift (in degrees of delay time) enables visual analysis of rotating or reciprocating objects through all points of motion/time/angle
  • Capable of being synchronized with input signal from sensor or controller
  • Warranty: 2 years


Flash Range60-120.000; From Input Signal 40-35.000
Accuracy±0.02% of reading
Lux Rating6000 FPM & 3.6° (100 μs):
Distance 20 cm 18.400 lx with 250 mm irradiation dia.,
Distance 50 cm 6200 lx with 350 mm irradiation dia.
1500 FPM & 3.6° (400 μs):
Distance 20 cm 15.000 lx with 250 mm irradiation dia.,
Distance 50 cm 6000 lx with 350 mm irradiation dia.
Lamp LifetimeTyp. 50.000 hours. Varies depending on usage
Display6 digit Red LED
ResolutionInternal Mode 1 FPM. External Mode 0.1 FPM
Flash Duration0.1 to 3.6º (0.14 μsec to 400 μsec)
Phase Shift0 to 999 msec; 0 to 359º
Power Requirement100 to 230 VAC
PlugOnly US Plug
Synchronization Input SignalH level: 2.5 – 12V; L level: 0 – 0.4V
Input Signal Range FPM (RPM)40 – 35.000
Input Signal Flash Delay FPM (RPM)60-10.000
Power Supply OutputDC24V
Built-in NiMH batteryBuilt-in NiMH battery •Continuous emission time Approx. 2 hours (when the emission duration is set to 3.6º) Approx. 5 hours (when the emission duration is set to 1.0º) •Charging time: Approx. 2.5 hours
Temperature Limits0 to 35°C
Humidity Limits35 to 85% RH
Protection ClassNEMA 4X (IP65)
Product Weight2.1 kg
Shipping Weight3,02 kg
ApprovalsRoHs / Not CE conform
Warranty1 year


Category Stroboscope Accessories

More details

Category  Stroboscope Accessories 0

Cic-Strobe Stroboscope Calibration

  • Exclusively using a standard which is traceable to British national standards and International standards ISO/IEC 17025

More details

Cic-Strobe Stroboscope Calibration  127039

DT-300CC Carrying Case

  • For use with DT-311D, DT-3015N & DT-3011N Stroboscopes
  • Hard plastic carrying

More details

DT-300CC Carrying Case 126371

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.