We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

D-2010 Motorized Precision Material Thickness Gauge


Made in GermanyThe D-2010 Precision Material Thickness Gauge has a stable and rigid base frame with an encapsulated, separate measuring block. And is a top choice if you appreciate high precision (up to 0.001 mm), easy operation, automatic processing and objective, reproducible measurement results.

The device can be adapted to the materials to be measured according to your requirements. Thus, the caliper surfaces, the caliper materials and the measurement pressures fit in exactly with the guidelines of ISO, EN, DIN or also with your own test regulations.

Common Standards
For textiles and non-woven textiles according to DIN EN ISO 5084 (measuring face 20 cm²/pressure 0.1 kPa and 1 kPa)

For fleece according to DIN EN ISO 9073-2 (measuring face 25 cm²/pressure 0.1 kPa and 0.5 kPa)

For geomaterials according to DIN EN ISO 964-1 (measuring face 25 cm²/pressure 2 kPa and 20 kPa, not 200 kPa)

The D-2010 device is also available with different measurement ranges:
Ranges 0 – 10 mm, 0 – 25 mm (or with the equivalents in inch, switchable).

With this instrument the most popular checking methods can be applied for textiles, felt, geomaterials, paper, floor coverings, leather, foils, rubber, plastic films etc.

The D-2010 has data outputs for the digital processing of the measurement results or for the transmission to a printer.
 


Features
  • Resolution 0.01 mm - standard, 0.001 mm - optional
    (0.001 mm is standard for D-2010-P, D-2010-F)
  • Gauging depth (centre of the stamp) 110 mm
  • Illuminated graphic touch-screen with menu controlled operation (optionally in German or English)
  • Individual measurements as well as measurement series with every specified number of measurement cycles are possible
  • Footpedal is included
  • The automatic zero point control can be selected by pressing the key
  • Dwell times of 1 – 60 seconds are adjustable
  • Motor-driven calliper movement with steady lowering speed (standard 2.5 mm/s)
  • The measurement path can be preselected in order to save time
  • Digital interface
  • Always up-to-date and simultaneous display of the measurement value, the measurement cycle, the average value and the standard deviation
  • Includes Calibration Certificate
  • Selectable measuring units mm / inch
  • Separate measuring block, incased against outside external impacts, for highest accuracy and repeatability

Available models
Model Standard Application Feeler dia. (mm) Feeler area (cm²) Pressure
D-2010-T DIN EN ISO 5084 Textiles 50.42 20 0.1 kPa and 1 kPa
D-2010-V DIN EN ISO 9073-2 Standard fleece 56.42 25 0.5 kPa
D-2010-G DIN EN ISO 964-1 Geomaterials 56.42 25 2 kPa
D-2010-G1-3 DIN EN ISO 964-1 Geomaterials 56.42 25 2 kPa, 20 kPa and 200 kPa
D-2010-NW DIN EN ISO 53855 Non-woven textiles 56.42
35.68
25
10
0.5 kPa, 1 kPa and 5 kPa
D-2010-P* DIN EN ISO 53105 Paper 16 2 100 kPa
D-2010-HY* DIN EN ISO 54540 Hygenic Paper 56.42 25 2 kPa
D-2010-L1 DIN EN ISO 53326 (out of date) Leather 10 0.785 50 kPa
D-2010-L2 DIN EN ISO 2589 Leather 10 0.785 49.1 kPa
D-2010-Gi*   Rubber 36.68 10 5 kPa
D-2010-CF ISO 2286-3 Rubber- or plastics-coated fabrics 12 1.13 2 kPa, 10 kPa and 24 kPa
D-2010-CF1 ISO 2286-3 Rubber- or plastics-coated fabrics 12 1.13 2 kPa, 5 kPa, 10 kPa and 24 kPa
      Feeler Calotte    
D-2010-F* DIN 53370 Foils R 30 mm   0.5 N
D-2010-AB DIN-EN 1849-2 Waterproofing sheets 10 mm 0.785 20 kPa
*Model D-2010-P, D-2010-HY, D-2010-Gi and D-2010-F have an resolution of 0.001mm
Individual configurations to an required standard are available upon request.

Comparative table series (D-2010)
  D-2020 D-2010 D-2005 D-2000
Touch-screen with menu control in German or English - -
Seven-segment display - -
Display illumination - -
Statics display - -
Automatic zero point control - -
Preselection of the measurement cycles - -
Preselection of the measuring range optional -
Adjustable dwell time - -
Motor-driven calliper movement -
Connection for pedal -
Manual calliper movement via a control lever - - -
Automatic material infeed, adjustable - - -
Digital interface
Available scale divisions 0,001 mm, 0,01 mm
Possible measuring ranges 0 – 10 mm, 0 – 25 mm, 0 – 50 mm
Length × width × height
(in mm, for measuring range 0 – 10 mm)
300 * 300 * 320 300 * 200 * 300 300 * 210 * 300 300 * 240 * 300
Weight
(in kg, for measuring range 0 – 10 mm)
31,5 24,0 23,0 22,5

Downloads

Options
Code R Higher resolution 0.001 instead of 0.01 mm
(0.001 mm is standard for D-2010-P, D-2010-F)
Code E Extended measuring range 0 - 25 mm
Code E2 Extended measuring range 0 - 50 mm
Code S Software & Cable
DKD-Cal Calibration report from a DKD authorized laboratory


Special models can be requested!


Specifications
Measuring Range0 - 10 mm, (25 mm optional, Code E)
Resolution0.01 or 0.001mm depending on configuration
Accuracy± 0,0008 mm at 0,0001 resolution
± 0,005 mm at 0,001 resolution
± 0,01 mm at 0,01 resolution
Depth of jaw160 mm
Measuring systemCapacitive -> Sylvac
DisplayGraphic display Touchscreen
Measuring unitmm or inch (switchable)
Stroke in mmLevel 1 = 2.0, level 2 = 3.5, level 3 = 5.0, level 4 = 6.5 and level 5 = 10.5 mm (full measuring range)
Dwell time1 - 60 seconds
Number of measuringUp to 50 per test series
Feeler shape and surface pressureAccording international standards DIN, EN and ISO
Output signalRS 232 for printer and USB for PC
Temperature range10 - 45 °C
Air humidityMax. 85 % r.H
Dimensions300 x 200 x 300 mm (LxWxH)
Weight, net (gross)24 kg

Buy Now
Products

Product
Price
Quantity
134448
D-2010-T Motorized Material Thickness Gauge for Textiles
€ 7.262,00 
134449
D-2010-V Motorized Material Thickness Gauge for Fleece
€ 7.262,00 
134450
D-2010-G1-2 Motorized Material Thickness Gauge for Geomaterials
€ 6.789,00 
134451
D-2010-NW Motorized Material Thickness Gauge for Non-woven
€ 7.262,00 
134452
D-2010-P Motorized Material Thickness Gauge for Paper
€ 7.435,00 
134453
D-2010-HY Motorized Material Thickness Gauge for Hygenic Paper
€ 7.325,00 
134454
D-2010-L Motorized Material Thickness Gauge for Leather
€ 7.178,00 
134455
D-2010-Gi Motorized Material Thickness Gauge for Rubber
€ 7.115,00 
134456
D-2010-F Motorized Material Thickness Gauge for Foils
€ 7.703,00 
 
Accessories

Product
Price
Quantity
132771
D-2000/2005/2010/2020 - Code R for Higher resolution 0.001 instead of 0.01 mm
€ 422,00 
133036
D-2000/2005/2010/2020 Code E - Extended measuring range 0 - 25 mm
€ 434,00 
134468
D-2000/2005 Code E2 - Extended measuring range 0 - 50 mm
€ 982,00 
133155
D-1000 / D-20XX DakkS-CAL accredited certificate
€ 123,00 
133578
D-1000/2000/2005/2010/2020 - Code S - Software & Cable
€ 165,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
  Information