We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

ML-275 Motorized Horizontal Test Stand

2 Models Available
- Basic Model
MH-275 - With Auto Cycle & Force Control

The new ML-275 motorized test stand is designed for tension, compression, and friction testing. Combination of screw system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range. Speed control, quick return and emergency stop are standard features.

The ML-275 accepts the DPS, Z2 & ZP force gauges, additional models require the AP-002 adapter plate.

MH-275 Additional Features

High/Low Setpoint Force Control

When the force value reaches the Low setpoint, force control is activated to hold the tension or compression force between the High and Low setpoints programmed on the Imada Z Series force gauge. Use the optional digital timer to program the duration of the hold, up to 100 minutes in 1second increments. Ideal for non-destructive testing.

High Setpoint Force Control
When the force value reaches the Low setpoint, speed is reduced to the test speed set by the Speed Adjust Knob, and when the tension or compression force value reaches the High setpoint programmed on the Imada Z Series force gauge, the test stops. Ideal for creep testing.

Speed control, quick return and emergency stop are standard features. The MH-275 accepts any of the standard range Imada force gauges. Optional timer and digital distance meter available.

Designed to work with the DPS, Z2 & ZP force gauges.

  • One stand for both compression (push) and tension (pull) tests
  • Digital Distance Meter Optional
  • No programming required

Speed Ranges
Standard Speed 0.3 – 7 in/min
(10 - 292 mm/min)
Low Speed 0.2 - 4.2 in/min
(18 - 584 mm/min)
High Speed 0.6 - 15.7 in/min
(38 - 1194 mm/min)

Dimensions ML-275

Related Products

Z2 Digital Force Gauge

  • Output signals (RS 232 C, analog and Mitutoyo Digimatic)

More details

Z2 Digital Force Gauge

DS2 Digital Force Gauge

  • Real time and peak mode (selectable)
  • lb, kg, and Newton units are push-button selectable

More details

DS2 Digital Force Gauge

Capacity 275 lbs / 125 Kg / 1250 N
Stroke 11.8" / 300 mm
Travel Rate Refer to Speed Ranges above
Dimensions Refer to dimensions above
Weight 31 lbs / 14 kg
Compatible Gauges DS2, Z2 and ZP
Warranty 2 years

Buy Now

Product name
ML-275 - Horizontal Test Stand
£ 4.235,00 
MH-275 - Horizontal Test Stand
£ 5.061,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability : Available , preorder 1-2 weeks , special order, request

Request Information / Quotation

Your information/quotation request is send!


Your message was successfully sent!

Due to technical problems, we are temporarily unavailable by phone. For requests, our head office can be reached under number: +31 53 4356060