We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

TSC/TSCH1000 Manual Precision Force Measurement Test Stand


Made in the USAThe TSC1000 Force Measurement Test Stand is built for precision testing with a large hand wheel with nut that runs over an acme thread and moves 2,5mm per revolution.
The moving part of the stand is mounted on the bottom of the column and therefore moves the loading table up or down for compression or tension measuring.

The solidly build TSC1000 series has a capacity op 5kN (5000 N) and is available in a horizontal and vertical version.
The stand includes a loading table with threaded holes for fixture or grip mounting with a 76mm space between the center of the measuring table to the column.
With the force gauge mounted in a fixed position above the moving table, all Mark 10 digital force gauges fit to the standard mounting plate.
A test setup can be completed in combination with Mark 10, attachments and gripping fixtures.

The TSC1000 test stands come in a complete kit with a number of standard accessories, depending on the version, vertical or horizontal.
In addition to the standard setup a digital travel display, TSA001, is available. For output to a pc a cable, AC1112, and a communication adapter, MRS100A, are required.
A set of wall mounts, TSA002, makes it possible to adapt the test stand to a bench or wall mounted instead of the base.
Column extensions accommodate for larger samples. Column extensions just increase the sample clearance they do not change the travel distance.


Features
  • Precision Acme screw and nut
  • Loading table with 25 #10-32 UNF holes for fixture mounting
  • Mounting holes for bench mounting
  • Compatible with all Mark-10 force gauges, fixtures and grips
  • Optional digital travel display

Manual test stand comparison
ModelForce capacityMaximum test travelLoading methodTravel rateMaximum, sample clearance
ES10500N229mmSpring loaded lever26,7mm / lever rev.229mm
ES10500N229mmSpring loaded lever26,7mm / lever rev.229mm
ES20500N229mmTop mounted hand wheel1,5mm / wheel rev.229mm
ES301000N330mmSide mounted hand wheel1,3mm / wheel rev.356mm
TSA750(H)3750N95mm with travel stops
152 without travel stops
Lever with rack & pinion, lever can be positioned in 30° increments76,2mm / lever rev.Vertical 267mm
Horizontal 368mm
TSB100500N95mm with travel stops
152 without travel stops
Lever with rack & pinion, lever can be positioned in 30° increments76,2mm / lever rev.330mm
TSC1000(H)5000N89mmInline hand wheel2,5mm / wheel rev.Vertical 254mm
Horizontal 330mm
TSF(H)5000N102mmSide mounted hand wheel0,34mm / wheel rev.Vertical 356mm
Horizontal 459mm
- Maximum travel and/or clearence depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures. - Column extensions are available for all test stands except ES05, ES10 and ES20. - Models with (H) are available in vertical and horizontal versions

Complete Kit

The TSC1000 and/or TSC1000H test stands come with the following accessories:

  • G1009 compression plate, 2” dia.
  • G1009-1 compression plate, 3” dia.
  • G1028 small hook
  • G1030 thread adapter, 5/16-18M to #10-32F
  • G1035 large hook
  • G1037 coupling, 5/16-18 F/F
  • G1038 medium hook
  • G1039 coupling, #10-32 F/F
  • G1041 thread adapter, 5/16-18M to #1/2-20M
  • G1042 extra large hook
  • G1044 1/2-20F adapter plate with mounting hardware
  • 5/16-18 stud with jam nuts
  • #10-32 stud with jam nuts
  • Base (TSC1000)
  • 2 Mounting leg with hardware (TSC1000H)
  • Additional column cap with hardware (TSC1000H)
  • 4 Thumb screw for force gauges with 0.12 - 500 lbF capacities
  • 4 Thumb screw for force gauges with 1,000 - 2,000 lbF capacities
  • Allen wrench set


Dimensions
TSC
Dimensions-TSC


Size measurements for the TSC1000 Manually operated Force Test Stand 

All sizes in inch and (mm)

TSCH
Dimensions-TSCH


Size measurements for the TSC1000H Manually operated Force Test Stand 

All sizes in inch and (mm)


Accessories

AC1004 Mounting Kit for 5I, 3I or TT03 to TS-Series Test Stands


  • Mounting Kit for 5I, 3I or TT03 to TS-Series Test Stands

More details

AC1004 Mounting Kit for 5I, 3I or TT03 to TS-Series Test Stands 126115

Category Mark-10 Attachments


More details

Category  Mark-10 Attachments 0

Specifications
Load capacity:5 kN (500kg / 1,000 lb)
Maximum travel:89 mm (3.5”)
Dimensions:152 mm x 203 mm x 660 mm (6”W x 8”D x 26”H)
Travel Rate:25 mm (0.1") per revolution
Weight:TSC1000 11.3 kg (25 lbs)
TSC1000H 9,1 kg (20 lbs)
Shipping weightTSC1000 13.6 kg (30 lbs)
TSC1000H 12,7 kg (28 lbs)
Waranty3 years

Related Products

Series-3 Digital Force Gauge


  • High-speed 2.000 Hz sampling rate
  • USB data output of continuous or individual data points

More details

Series-3 Digital Force Gauge

Series-4 Advanced Digital Force Gauges


  • High-speed 3.000 Hz sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs

More details

Series-4 Advanced Digital Force Gauges

Series-5 Advanced Digital Force Gauge


  • ±0,1% accuracy
  • High-speed 7.000 Hz peak sampling rate
  • 1.000-point data memory with statistics and outputs

More details

Series-5 Advanced Digital Force Gauge

Downloads

Buy Now
Products

Product
Price
Quantity
131913
TSC1000 Handwheel-operated Test stand, 1000 lb/4500 N, vertical
€ 1.779,00 
131099
TSC1000H Handwheel-operated Test stand, 1000 lb/4500 N, horizontal
€ 1.779,00 
 
Accessories

Product
Price
Quantity
131914
TSC001 - Digital travel display for TSC1000(H), 6"/150 mm
€ 787,00 
131909
TSA002 - Horizontal/wall mounting kit for TSA750/TSC1000
€ 182,00 
138108
SP-2734-42 Column Extension, 42 in. / 1065 mm for TSC
€ 388,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
 Information