We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

The G1095-G1096-G1097 3-point / 4-point Bend Fixtures


Made in the USAThe G1095/96/97 series of 3-point / 4-point Bend test fixtures is developed as a versatile bend test system that conforms to ASTM C393, C1161, D790, and related standards.

This comprehensive range of bend fixtures is purpose-built for both 3-point and 4-point bend testing across a diverse array of materials, including plastics, metals, ceramics, and tubing. Available in two distinct base sizes, each fixture comes equipped with an upper anvil and the option to select the preferred support diameters. Choose a base-anvil combination for 3-point bend testing or opt for two bases for 4-point bend testing.

The bases of these fixtures feature movable blocks with multiple V-grooves, designed to accommodate various support diameters. As a standard inclusion, 10 mm diameter supports are provided, with the option to choose from a range of other sizes to suit your specific needs.

Additionally, the fixtures come complete with engraved rulers that are dual-graduated, featuring both inch and millimeter scales on opposite sides. They also feature integrated eye-end mounting, which requires an eye-end adapter for seamless compatibility with Mark-10 force gauges, force sensors, and test stands. For added convenience, the bases are equipped with thru-holes and mounting screws, allowing for direct attachment to specific test stands.

Additional kits with 1 mm, 2 mm, and 5 mm support diameters accommodate other testing requirements. Each kit includes four supports and eight o-rings.
Contact us for custom sizes up to 15 mm.


Features
  • Designed for 3-point and 4-point bend testing
  • Rugged design
  • May be used with eye end adapters or mounted to test stands with mounting screws (except anvil - eye end mounting only).
  • Accommodate a broad sample size range
  • Dual graduated rulers - in and mm
  • Recommended for use with a motorized test stand.

Dimensions
G1095-2 Point Base
Dimensions-G1095-2 Point Base


All sizes are noted in inch with metric sizes in [mm] behind.

G1096 -2 Point Base
Dimensions-G1096 -2 Point Base


All sizes are noted in inch with metric sizes in [mm] behind.

G1097 -Anvil
Dimensions-G1097 -Anvil


All sizes are noted in inch with metric sizes in [mm] behind.


Specifications
ModelCapacity (kN)Weight (kg)Shipping weight (kg)Housing materialBlock materialSupport materialIncludes
G10952,51,31,82024 Al303 SS416 SS, HardenedScrews for test stand mounting, two 10 mm dia. supports and o-rings
G1096103,24,12024 Al303 SS416 SS, HardenedScrews for test stand mounting, two 10 mm dia. supports and o-rings
G1097100,20,5303 SS-416 SS, Hardened10 mm. dia. support and o-rings
Weight includes two blocks and 10 mm dia. supports

Related Products

G1009 Compression Plates


  • Available in two sizes, 51 mm and 76,8 mm,
  • Available with and without vented channels
  • G1009 and G1009-2 include a #10-32 M/M stud with jam nuts G1009-1 and -3 include a 5/16-18M/M stud with jam nuts

More details

G1009 Compression Plates

G1087 Compression Plates, High Capacity


  • Concentric grooves aid in sample positioning
  • Select from two sizes
  • Integrated eye end mounting

More details

G1087 Compression Plates, High Capacity

G1029-G1036 Flat Head


  • General compression testing
  • Capacity 1000 N / 2500 N
  • Available in 2 sizes

More details

G1029-G1036 Flat Head

Eye End Adapter For Mounting of Grips to Force Gauges / Sensors and Test Stands



More details

Eye End Adapter For Mounting of Grips to Force Gauges / Sensors and Test Stands

F105 / F305 / F505 / F505H Force Test Frame with IntelliMESUR® controls


  • Set up, run, and analyze data via the integrated IntelliMESUR® control panel
  • Integrated motion control and data collection solution with seamless interface for FS05 force sensor without cables
  • Plug & Test® system can work with third-party load cells through PTAF adapter

More details

F105 / F305 / F505 / F505H Force Test Frame with IntelliMESUR® controls

F755 / F1505 F755 / F1505 Force Test Frame


  • Set up, run, and analyze data via the integrated IntelliMESUR® control panel
  • Build in test creation wizards
  • Integrated motion control and data collection solution.

More details

F755 / F1505 F755 / F1505 Force Test Frame

Series-F + EasyMesur F105 / F305 / F505 / F505H Series F test frames with EasyMESUR® F105 / F305 / F505 / F505H


  • Integrated Force sensor and seamless interface for FS05 force sensor without cables
  • Integrated touch screen control panel
  • Set up, run, and analyze data via the integrated EasyMESUR® control panel

More details

Series-F + EasyMesur F105 / F305 / F505 / F505H Series F test frames with EasyMESUR® F105 / F305 / F505 / F505H

Series-F + EasyMESUR F755 / F755S / F1505 / F1505S Series F test frames with EasyMESUR® F755 / F755S / F1505 / F1505S


  • Integrated Force sensor and seamless interface for FS05 force sensor without cables
  • Separate USB C connections for PC and external storage
  • Integrated touch screen control panel

More details

Series-F + EasyMESUR F755 / F755S / F1505 / F1505S Series F test frames with EasyMESUR® F755 / F755S / F1505 / F1505S

Downloads

Buy Now
Products

Product
Price
Quantity
135425
G1095 Bend fixture, eye end
€ 915,00 
135426
G1096 High capacity bend fixture, eye end
€ 1.728,00 
135427
G1097 Upper anvil for bend fixtures, eye end
€ 241,00 
 
Accessories

Product
Price
Quantity
135428
AC1067 Rollers for bend fixtures, 1 mm, set of 4
€ 87,00 
135429
AC1067-1 Rollers for bend fixtures, 2 mm, set of 4
€ 87,00 
135430
AC1067-2 Rollers for bend fixtures, 5 mm, set of 4
€ 87,00 
135431
AC1067-3 Rollers for bend fixtures, 10 mm, set of 4
€ 87,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Contact 
Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.
  Information
\n