We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

TRAMEX SKIPPER PLUS Tramex Skipper Plus Marine Moisture Detector (Non-Destructive)


The TRAMEX SKIPPER PLUS Tramex Skipper Plus Marine Moisture Detector (Non-Destructive) is no longer available and has been replaced by Tramex Skipper Moisture Meter 5.
Click here to see the Tramex Skipper Moisture Meter 5.


Tramex Skipper Plus is a non-destructive moisture meter for the marine industry

The Tramex Skipper Plus non-destructive moisture meter provides a complete, safe method for detecting excess moisture in GRP and wooden boats. Three scales of sensitivity allow moisture detection in salt or fresh water.

Moisture can cause peeling and blistering of applied finishes and treatments, newly applied finishes can fail prematurely if the wood it is applied to is not sufficiently dry. Hidden or trapped moisture can lead to mold and biological growth.

The Tramex Skipper Plus can be moved across the surface of the boat to moisture survey in a fast and thorough manner, detecting moisture non-destructively through paint and coatings on wood up to a depth of 1.25". The Tramex Skipper Plus can also be used to detect leaks and trace them to source both above and below decks.


Typical applications
  • Early detection before blistering occurs
  • Identification of the affected area
  • Monitoring of the hull during dehumidification and repairs
  • Checking dryness of flaking or peeling areas before recoating

How it works
The Tramex Skipper Plus moisture meter detects moisture in wood or GRP (Glass Reinforced Plastic) by measuring the resistance between two low frequency AC signals transmitted from the soft rubber electrodes on the base of the instrument.

Because salt water is more conductive than fresh water, the Skipper is fitted with different ranges of sensitivity to allow testing of wood or GRP in either fresh or salt water environments.

Simply select the correct scale:
Scale 1: Moisture content in hardwood for fresh water (%H20)
Scale 2: Moisture in GRP (Comparative)
Scale 3: Surface Moisture(Comparative)

360 degree photo

Features
  • Non-destructive detection and measurement of moisture in wooden boats, GRP (Glass Reinforced Plastic) boat hulls, wooden parts, components, decks etc.
  • External rubber electrodes in direct contact with material being tested for best sensitivity, repeatability and greater depth of signal penetration.
  • Wide range of readings for wood of 5 to 30% on hard wood scale and 0 to 100 on comparative scale for GRP and other materials.
  • Large, clear, easy to read display giving meaningful readings
  • Automatic power cutoff when not in use for a specific time (battery saver)
  • Confirms if wooden boats are dry before painting or varnishing
  • Early detection before blistering appears
  • Identify extent of moisture affected area
  • Check stripped areas prior to re-coating
  • Deep signal penetration to detect elevated moisture through most covering and coating materials and deep into the core of composite hulls without having to damage or puncture the material being tested.
  • Hold function enables user to "freeze" the reading, useful when taking readings in awkward places where the meter face may not be visible.
  • Three measurement ranges optimized for testing of different materials such as hardwood, GRP and surface moisture.
  • High moisture audio warning tone that can be switched on or off
  • Identify the presence of moisture osmosis in fiberglass hulls
  • Check if racing boats are carrying excess moisture weight
  • Trace deck and bulkhead leaks
  • Monitor hull during dehumidification

Complete Kit
The Tramex Skipper Plus Non-Destructive Marine Moisture Detector is delivered as a complete kit including:
- Tramex Skipper Moisture Meter
- Carrying Pouch
- Instruction Manual
- 9 Volt Battery


Specifications
Display:Analog Meter
Range:5% to 30% on hard wood moisture content
0 to 100 on comparative scale for GRP and other materials
Measurement depth:± 1.25 (32 mm)
Measuring method:Non-destructive signal resistance
Measurement frequency:31 KHZ
Electrodes:co-planar conductive rubber
Net weight:9 ounces (260g) including battery
Dimensions:6 x 3.2 x 1.2" (150 x 80 x 30 mm)
Battery:9v battery
Warranty:1 year

Accessories

Tramex Check Box
Check Boxes for Non-Destructive Moisture Meters


  • Checks: up to 3 different ranges
  • Easy to use
  • Tolerance: ± 1%

More details

Tramex Check Box <br>Check Boxes for Non-Destructive Moisture Meters 127076

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
  Information