Designed for maximum performance, portability and ease of use, the DS-2000LED is a hand-held battery powered LED Digital Stroboscope for use in speed measurement as well as for motion analysis. It is fitted with seven (7) state-of-the-art, super-bright LEDs mounted in a precision-machined aluminum head with optimized optics, providing the highest light output of similar strobes on the market.
The DS-2000LED can operate even at the highest flash rates for up to six hours continuously on a single set of three (3) standard AA-batteries . Keypad controls adjust flash rate in single increments as well as special keys for 2X and ÷2 functions. Other user-programmable settings include flash duration, phase shift, delay and much more.
Supplied in a high-impact plastic with rubber protective sleeve providing additional protection as well as improved grip for the operator. Lifetime LEDs do not wear-out or need replacement making this product ideal for use on the factory floor, in the field or in the laboratory. Applications include ideal for speed, motion and vibration analysis, on rotating shafts, fans, cams, hi-speed motion analysis for speakers or ink-jet printing and more.
Lifetime LEDs do not wear-out or need replacement
Produces the brightest flash and sharpest image over the entire range to
Market-leading 3000 Lux brightness (measured at 6000 fpm at a distance of 20 cm)
NIST-Traceable Calibration Certificate provided
Three (3) AA-Batteries provide six hours of continuous use operation
External Trigger Input/Output is optionally available. Specify model DS-2000LED-OT
Market-leading 1500 Lux brightness (measured at 6000 fpm at a distance of 20 cm)
Light Output (LUX) vs Distance
at 20 cm Distance, 6000 flashes/min (FPM)
DS-2000LED Strobe is supplied in foam-fitted carrying case with 2 sets of 3x-AA batteries (6 batteries total), Traceable Calibration Certificate and Operating Instruction Manual.
DS-2000LED-OT Strobe also includes connector for external trigger signal and 3 meter/10ft. trigger cable.
30 - 300,000 FPM
Adjustable (1 usec up to 8522 usec)
0.045% (+/- 1 digit) or better
± 0.1 FPM (30 - 999) ± 1 FPM 1000+
3000 Lux @ 6000 FPM / 20cm (7.9 inch)
IP65 (Protection from Dust and Water Jets)
LCD, multiple lines
CE (as per EU norms)
Approx. 6.500 K
3x AA size batteries or 3x NiMH rechargeable batteries
Aluminum / ABS Heavy duty design
191 x 82 x 60 mm / 7.5 x 3.2 x 2.4 inch
400g (including batteries)
0° - 45° C / 32° - 113° F
NiMH: approx 11h at 6.000 FPM Disposable: approx 6 h at 6.000 FPM
Principle: Optocoupler, voltage-free
< 1 V
3 - 32 V, NPN + PNP
Principle: Short-circuit and overvoltage proff transistor output to the optocoupler control, non-isolated
Short-circuit and overvoltage proff transistor output to the optocoupler control, non-isolated