We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

RMS-TD-180 Digital Humidity & Temperature Transmitter with external sensor

Made in the EuThe Checkline RMS-TD 180 Temperature & Humidity Transmitter with an external sensor for Humidity and Temperature, designed for maximum temperatures of 180°C
Specially designed for for laboratory, climate control, drying technology, wood processing, food industry, feed, construction, paper industry, printing industry, agriculture, biotechnology, and pharmaceutical industry.

In manufacturing processes, during further processing, storage, and transportation, the precise measurement of humidity and temperature plays an increasingly crucial role. Only through accurate humidity monitoring can high product quality be ensured.

The RMS-TD Transmitter Series from Checkline Europe are optimally suited for this purpose.
A 100mm long robust sensor tube (Ø 12mm) made of stainless steel with a screwed-on sensor cap, offset on a 1-meter-long cable, expands the applications of the RMS-TD 180 temperature and humidity transducer. Various sensor caps (steel sinter, bronze sinter, plastic with or without filter paper, etc.) are available as optional accessories.

Humidity and temperature values are output by default via analog 4-20mA current output. Optionally, other interfaces such as RS232, Profinet, Modbus, or USB can be chosen for the temperature and humidity transducers.

An additional enhancement of capabilities is provided by an optional display, where current humidity and temperature values can be read.

Two optional relay outputs enable the direct control of, for example, alarms or ventilation directly from the humidity and temperature transducer. These switching outputs can be freely configured directly on the RMS-TD 180 humidity transducer (switching points, hysteresis).

Effortless integration into an existing system is guaranteed by the supplied 190 cm long connection cable, including molded, robust sensor connector (on the sensor side).
The second side of the cable is provided with cable lugs for easy connection, for example, in a control cabinet.

The capacitive humidity sensor used ensures long-term stable and accurate measurement results and is resistant to normal contamination and many chemicals. The sensors built into the humidity transducers also stand out for their very rapid response behavior.

The high measurement accuracy of the Checkline's RMS-TD series is ensured through factory calibration at six humidity points.

  • Temperature range: max. 180 °C
  • Analog output (optional: interfaces such as RS232, Ethernet or USB)
  • External sensor
  • Stainless steel sensor tube - Ø12 x 100mm

Complete Kit
  • RMS-TD 180 
  • Connecting cable of 1.9 m length 
  • Operating manual

OutputAnalog output
Relative Humidity0 to 100%
Accuracy Moisture+/- 2% (10 to 90%)
Output Moisture4 to 20mA (0 to 100%)
Temperature Range-40 to +180 °C
Accuracy Temperature+/- 0,3 °C (+10 to +60 °C)
Output Temperature4 to 20 mA (-20 to +180 °C)
Power Supply12 to 29VDC
Temperature Electronics-20 to +85 °C
Dimensions Electronics Housing70 x 32 x 120 mm
Dimensions SensorØ12 x 100mm
Optional interfacesRS232, USB, Ethernet
Warranty1 Year



Buy Now

RMS-TD-180 - Humidity & Temperature Transmitter
€ 1.293,00 

CAL-UNIT-TUBE - Calibration adapter for tube sensor
€ 192,00 
RH-CAL-AMPVAR - Certified calibration ampoules 2x35%, 1x50%, 2x80%
€ 114,00 
RH-CAL-AMP50 - Certified calibration ampoules 5 x50%
€ 114,00 
Drip-protection for RMS-TD transmitter
€ 16,00 
Angle bracket for RMS-TD
€ 36,00 
RS232 interface for RMS-TD
€ 223,00 
USB interface for RMS-TD
€ 182,00 
Ethernet interface for RMS-TD
€ 422,00 
RMS-TD-DISPLAY - Optional display with keyboard for RMS-TD Transmitters
€ 223,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.