We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

DT-2100 Handheld Tachometer with USB Output - Combination Contact / Non-Contact

The new Checkline Europe DT-2100 is a state-of-the-art combination contact / non-contact hand-held tachometer. The advanced DT-2100 features data-logging, USB output and a programmable scaling feature to offset RPM according to application variables. A backlit LED Display with upper/lower limit icons and a unique X-Y Graphic mode is also featured on this device. Additional display modes like for instance the "Needle Sweep" and "Bar Graph" offer the user a choice of how to view the data. The display may be inverted to optimize the viewing angle.

The tachometer measures RPM up to 99,999 RPM at distances from 5 cm up to 400 cm in non-contact mode . When using the supplied screw-on adapter, the DT-2100 is also capable of measuring contact RPM, surface speed, or length.
For a low speed range from 0.10 to 10.00 rpm, the DT-2100-OPCAS-L Low Speed Adapter is available.

Data logging can be set for single point or continuous logging. Single data points as well as statistics (Max, Min, Average) can be stored in the built-in memory and recalled to the display. Users often need to adjust machinery during testing, whereas the DT-2100 can be mounted on a tripod, continuous logging may be selected and machinery adjusted as necessary. You can easily review the data, following testing, on the DT-2100's display or download it to a computer using the optional PC Software.

A calibration certificate is available optionally.

  • Built-in Memory with USB Data Output
  • Data Logging with Continuous, Single Unit or Statistics modes
  • 1/4-20 Threaded Insert on bottom of housing for fixed-mounting or use on Tripod
  • Reversible Display
  • Programmable multiplier to convert reading based on wheel diameter, gear ratios, etc...
  • On-screen hi-lo limits for pass/fail analysis
  • View data and statistics on tachometer display or with optional Windows software
  • Non-Contact length measuring mode (requires reflective tape for edge of roller)
  • Auto-detection of contact adapter
  • Powerful laser for non-contact measurements from 5 to 400 cm

360 degree photo

Complete Kit

The DT-2100 is supplied as a complete kit with:

  • Tachometer,
  • 2 Cone adapters,
  • Funnel adapter,
  • 3.5 Inch extension shaft,
  • Surface speed wheel (6 inch circumference),
  • Reflective tape,
  • 2 AA batteries,
  • Contact adapter
  • Carrying case
  • Calibration certificate optionally available

Related Products

CDT-2000HD Contact and Non-Contact Digital Tachometer

  • Built-in memory stores maximum, minimum, average and last reading for recall to the display
  • Measures speeds from as low as 1.00 rpm up to 99,999 rpm
  • NEW - Molded Rubber Shell Provides Additional Physical & Environmental Protection

More details

CDT-2000HD Contact and Non-Contact Digital Tachometer


Li-Ion Rechargeable AA Batteries via the USB to USB-C

  • Li-Ion rechargeable battery
  • Stable voltage of 1,5 V over 95% of the runtime
  • Charged via the USB to USB-C cable

More details

Li-Ion Rechargeable AA Batteries via the USB to USB-C 127554

10009S Reflective tape

  • Self-adhesive reflective tapes
  • 4 x 35 pcs.

More details

10009S Reflective tape 125834

RangeNon-contact: 6-99,999 rpm
Contact: 0.8-25,000 rpm
For a low speed range from 0.10 to 10.00 rpm, the DT-2100-OPCAS-L Low Speed Adapter is available.
Accuracy±0.006% of reading ±1 least significant digit
Measuring UnitsSpeed: rpm, m/min, cm/min, inch/min, ft/min, yds/min, rps, m/sec, cm/sec, inch/sec, km/hr, mph
Distance: cm, m, km, in, ft, yd
MemoryContinuous Mode: 1000 readings
Single Mode: 100 readings
Statistics Mode: 100 readings
Measuring Distance5 to 400 cm
DisplayGraphical Blue Light OLED, reversible
Display Update TimeSelectable: 100 ms, 500 ms, 1 sec, 5 sec
Power2 AA 1.5V batteries or USB
Battery LifeApprox: 20 hours with brightness set to 20%
Temperature Limits0º - 45ºC Non-Condensing
Dimensions155 x 55 x 35 mm
Product Weight125 g
ApprovalsCE, RoHs
Included Accessories2 Cone adapters, Funnel adapter, 3½ inch Extension shaft, surface speed wheel (6 inch circumference), 2 AA batteries, contact adapter and carrying case

DT-2100 Software Demonstration


Buy Now

DT-2100 Combination Contact / Non-Contact Tachometer with USB Output
€ 361,00 

€ 60,00 
DT-2100-OP-PCS, PC software for DT-2100 Tachometer
€ 99,00 
DT-2100-OP-CAS-L, LOW SPEED Screw-In Contact Adapter for DT-2100
€ 120,00 
DT-2100-OP-CAS, Screw-In Contact Adapter for DT-2100
€ 73,00 
DT-2100-OP-RBB - Protective Rubber boot for DT-2100
€ 47,00 
Li-Ion Rechargeable AA Batteries - 4 pcs (with USB to USB-C cable)
€ 25,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.