We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

EKM5 Myometer Kit


Made in the USAThe EKM5 Myometer Kit with the Series-5-200 Digital Force Gauge is developed to facilitate ergonomic studies, and a wide range of strength assessments. With this kit compression and tension can be measured up to 100 kg (1 kN).

The Force Gauge has a sampling rate of 7.000 Hz, an accuracy of ±0,1% of full scale and a resolution of 1/5000which make it capable of highly accurate force measurements.
The easy menu navigation makes for efficient use of the extensive features and configurable parameters of this device.

The EKM5 accommodates a memory up to 1000 measurements with statistical calculations, average force over-time and data output.
Data connectivity is provided through RS-232, Mitutoyo (Digimatic), USB or analog outputs.

This kit comes with MESUR® Lite data acquisition software.
MESUR® Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

The Series-5 Force Gauge in de kit is compatible with a wide range of attachments to expand its possibilities, making it ideal for ergonomists and other professionals.


Features
  • 1,000 N force capacity
  • Measures real time, average, and peak pull and push forces
  • Accuracy of ±0.1% of full scale
  • Sampling rate of 7,000 Hz
  • USB, RS-232, and analog outputs
  • High / low limit indicators, for pass / fail and minimum force testing
  • 1,000-point data memory with statistical calculations. Data may be bulk downloaded to included MESUR® Lite data collection software.
  • Force gauge is compatible with other Mark-10 grips and attachments

Complete Kit

The EKM5 Myometer kit comes with:

  • M5-200 advanced force gauge
  • Carrying case
  • Tabletop mounting kit for force gauge, for vertical or horizontal orientations
  • Adjustable length looped strap
  • G1107 snap hook
  • AC adapter/charger
  • MESUR® Lite data collection software
  • USB cable
  • NIST-traceable certificate of calibration with data


Dimensions
Dimensions-SERIES EKM5 MYOMETER KIT


Series-5 Force Gauge model M5-200 dimensions

All dimensions are noted in Inches with metric sizes in (mm) behind.

Load Cell Thread: 5/16-18 UNC
Hex size: 11/32 [8.74]


Accessories

Mesurgauge / Mesurgauge plus Load & Travel Analysis Software


  • Sends data from a force or torque gauge and travel display to a PC for further analysis

More details

Mesurgauge / Mesurgauge plus Load & Travel Analysis Software 126514

Cic-Force Calibration Force Gauge


  • Easy planning of calibration
  • Short turnaround
  • Exclusively in accordance with Deutscher Kalibrierdienst (DKD) working standards, class F1; calibration-no: 19026 - 07

More details

Cic-Force Calibration Force Gauge 127037

Category Mark-10 Attachments


More details

Category  Mark-10 Attachments 0

Specifications
Accuracy±0.1% of full scale
Sampling rate7,000 Hz
PowerAC or rechargeable battery.
Multi-step low battery indicator is displayed.
Gauge shuts off automatically when power is too low.
Battery lifeBacklight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Capacity x Resolution200 x 0.05 lbF
3200 x 1 ozF
100 x 0.02 kgF
1000 x 0.2 N
1 x 0.0002 kN
Outputs USB/RS-232: Configurable up to 115.200 baud. Automatic output available up to 250 Hz. Including Gauge Control Language 2 for full computer control.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VCD, ±0,25% of full scale at capacity
General purpose:Three open drain outputs, one input
Set points: Three open drain lines
Safe overload200% of full scale (display shows “OVER” at 110% and above)
Warranty3 years

Related Products

Series E Series E - ergonomic force gauge for compression and traction


  • Data memory for 5000 measured values - measured values can be stored manually or continuously with up to 7000 Hz
  • Measures compressive and tensile force peak values
  • Statistical functions for stored measured values

More details

Series E Series E - ergonomic force gauge for compression and traction

EK3 Basic Ergonomics Testing Kit


  • High-speed 2,000 Hz sampling rate
  • USB data output of continuous or individual data points
  • Ultra compact size

More details

EK3 Basic Ergonomics Testing Kit

Ergonomics Force Gauges Comparison Chart
 EK3 kit (Series-3)EKE kit (Series E)EKM5 Myometer (Series-5)
Accuracy±0.3%±0.2% ±0.1%
Sampling rate2000 Hz7000 Hz7000 Hz
Units of measurementlbF, kgF, NlbF, ozF, kgF, N, kNlbF, ozF, kgF, N, kN
Data outputsUSBUSBUSB, RS-232, Mitutoyo, analog
Averaging mode-YesYes
On-board data memory & statistics-Yes up to 5000 readingsYes 1.000 readings, with output
Continuous data capture-YesYes
Accessory mountingTraditional mounting threadsClick-LockTM TechnologyTraditional mounting threads
Password protection-YesYes
Available accessories:---
- Single handle gripYesYes (in professional kit)Option
- Double handle gripYesYes (both kits)Option
- Padded attachment, curvedYesYes (both kits)Option
- Padded attachment, flatYesYes (both kits)Option
- Padded attachment, squareYesYes (in professional kit)Option
- Padded attachment, circular-Yes (in professional kit)-
- Hook-Yes (both kits)-
- Chain / hook assembly-Yes (in professional kit)-
- Pistol grip-Yes (in professional kit)Option
Myometer kit-OptionYes
MESUR-Lite software includedYesYesYes

Downloads

Buy Now
Product

Product
Price
Quantity
136546
EKM5-200E Digital Myometer Kit - 1000 N
€ 1.688,00 
 
Accessories

Product
Price
Quantity
130524
15-1004 MESUR gauge, single license
     
126886
AC1002-1 Handle grip for Series 7/5/4 gauges, single grip
€ 130,00 
131956
AC1002 Handle grip for Series 7/5/4 gauges, double grip
€ 140,00 
130809
G1019 Padded attachment, square, 5/16-18F
€ 53,00 
130810
G1020 Padded attachment, rectagular, 5/16-18F
€ 72,00 
130811
G1021 Padded attachment, curved, 5/16-18F
€ 92,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
 Information