We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

NE216 Multifunctional Counter with two presets

Made in GermanyIVO multifunctional counter with two presets. Can be used in a wide variety of applications. Can be programmed as preselection counter, time meter, totalizer.

Block diagram
Pin assignment

  • Main counter with two presets
  • Scaling can be progr. 0.0001...999.99
  • Interface RS485
  • Start value can be programmed
  • Preselection mode can be programed:
    - Progressive
    - Trailing preselection


Optional available for counter NE216

Z 100.02A Flexible transp. protective cover for 1 counter
Z 100.04A Flexible transp. protective cover for 2 counters

Z 118.033 Adapter plate for screw fixture
Z 118.034 Adapter plate for clamping bracket fixture
Z 118.035 Adapter plate for clamping bracket fixture with large front plate

See below for dimensions...

Display:7-segment LED-display
5-digit dis. of real value, 7.6 mm high
Decimal point can be programmed
Suppression of leading zero
Minus sign for negative values
Operation, keypad:Front membrane w. short-stroke keys
Front dimensions:DIN housing 48 x 48 mm
Mounting:Front installation
Fastening:Clamping frame
Weight:Version AC: ca. 260 g
Version DC: ca. 140 g
Type of connection:Plug-in screw terminals
Grid 5.08 mm / 3.81 mm
Core cross-section:Max. 1.5 mm 2
Housing material:Polycarbonate black, UL 94V-0
Membrane material:Polyester
Supply voltage:Choice of two voltages via switch on device. When supplied, always higher voltage adjusted.
115 / 230 VAC ±10 % (50 / 60 Hz)
24 / 48 VAC ±10 % (50 / 60 Hz)
12...30 VDC ±10 %, 5 % residual ripple
Power consumption:5 VA, 4 W
Sensor supply:12...26 VDC / 60 mA
Signal inputs:Comparator inputs
PNP, NPN or AC logic
Voltage level 4...40 V
Input resistance ca. 3 kOhm
Input counting rate:Can be programmed to 3 Hz, 25 Hz, 10 kHz
Control inputs:2 control inputs for reset, stop, hold, print, etc.
Signal outputs:Can be programmed as momentary or permanent signals
Impulse time can be programmed 0.01...99.99 s
Relay signal outputs:2 floating relays can be programmed as normally open or normally closed contacts
Internal spark suppression
Max. swit. voltage 250 VAC/110 VDC
Max. swit. power 1 A
Max. swit. capacity 150 VA/30W
Electronic outputs:Optocoupler outputs
Max. switching voltage +40 V
Max. switching power 25 mA
Max. residual voltage < 1 V
Data storage:> 10 years via EEPROM
Operation modes:To be programmed as adding or subtracting
Counting mode of signal inputs A / B:UP / DOWN, A - B, A + B, A 90° B x1, A 90° B x2, A 90° B x4
Ambient temperature:0...+50 °C
Storage temperature:-20...+70 °C
Relative humudity:Max. rel. humidity 80 %, at 25 °C, non-condensing
Protection:Front IP 65 to DIN 40050
General rating:EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2
Interference immunity:EN 50082-2
Emitted interference:EN 50081-1

If the desired model is not shown in the list of prices, price is on request

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.