We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

For support please call
+44 (0)121 2855 222

NE215 Multifunctional Counter with 2 presets and Preliminary testing by PTB

Made in GermanyIVO multifunctional counter with two presets. Can be used in a wide variety of applications. Can be programmed as preselection counter, time counter, totalizer.

Block diagram
Pin assignment

  • Main counter with two presets
  • Batch counter with preset value and multiplier (1...999)
  • Models with scaling factor 0.0001...99.9999
  • Interface RS232, RS485

Dimensions NE215

Suitable encoder and printer Preliminary testing PTB

Suitable encoder PTB GPI0W-Series
Suitable slip printer Star SP298

Suitable Encoder Models:
GPI0W.5102239 50 pul./rev., synchro fl. M4, cable 2 m radial
GPI0W.0101215 500 pul./rev., clamp. fl. M3, cable 2 m axial
GPI0W.1101439 50 pul./rev., clamp. fl. M4, cable 5 m axial
GPI0W.1101415 500 pul./rev., clamp. fl. M4, cable 5 m axial
GPI0W.1101639 50 pul./rev., clamp. fl. M4, cable 10 m axial
GPI0W.1101615 500 pul./rev., clamp. fl. M4, cable 10 m axial

Display: 7-segment LED-display
8-digit display of real value,
7.6 mm high
minus sign for negative values
Operation, keypad: Front membrane w. short-stroke keys
Front dimensions: DIN housing, 72 x 72 mm
Mounting: Front installation
Fastening: Clamping frame
Weight: Version AC: ca. 450 g
Version DC: ca. 320 g
Type of connection: Plug-in screw terminals
Grid 5.08 mm / 3.81 mm
Core cross-section: Max. 1.5 mm2
Housing material: Polycarbonate black, UL 94V-0
Membrane material: Polyester
Supply voltage: Choice of two voltages via switch on device. When supplied, always higher voltage adjusted.
115 / 230 VAC ±10 % (50 / 60 Hz)
24 VDC ±10 %, 5 % residual ripple
Power consumption: 7 VA, 6 W
Sensor supply: 12...26 VDC / max. 80 mA
Signal inputs: Optocoupler
Input resistance 1.65 kOhm
Control current 9...16 mA
Input counting rate: Max. 10 kHz
Control inputs: 1 control input for XP reset
1 control input for B1 reset
Signal outputs: Can be programmed as momentary or permanent signal
Impulse time can be programmed 0.01...9.99 s, tolerance: +0,01 s
Relay signal outputs: 3 floating center-zero relays
Internal spark suppression
Max. switch. voltage 250 VAC
Max. switch. power 1 A
Max. switch. capacity 150 VA / 30 W
Data storage: > 10 years via EEPROM
Counting mode of signal inputs A / B: A 90° B x1
Ambient temperature: 0...+50 °C
Storage temperature: -20...+70 °C
Relative humidity: Max. relative humidity 80 %, at 25 °C, non-condensing
Protection: Front IP 65 to DIN 40050
General rating: EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2
Interference immunity: EN 50082-2
Emitted interference: EN 50081-1

If the desired model is not shown in the list of prices, price is on request

Request Information / Quotation

Your information/quotation request is send!


Your message was successfully sent!