We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

DX2FP Limited Access Tension Meter with Ceramic Pins

Made in GermanyThe DX2FP features ceramic pins for measuring filaments moving at high speeds. Its long, flat fingers allow use in applications where there is limited access space or where the running filaments are close together.


Measuring Head Dimensions
Head Width (X):
27 mm
Head Length (Y): 46 mm

  • Dual flanged Non-rotating ceramic pins permit line speeds up to 6000 m/min.
  • 27 mm measuring head with outer rollers permits a narrow access "window"
  • The analog display shows changing and fluctuating tensions fast and enables an optimal process adjustment
  • Non-rotating ceramic pins permit line speeds up to max. 6000 m/min.
  • Certificate of Compliance with the order 2.1 according DIN EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according DIN EN 10204 with calibration report

Tension Ranges
ModelRanges Dial FaceMeasuring
Head Length (Y)
DX2FP-5 10 - 50 grams 27 mm46 mm  
DX2FP-12 20 - 120 grams 27 mm46 mm  
DX2FP-20 20 - 200 grams 27 mm46 mm  
DX2FP Dial Faces

Guide Pins
Order Code Line Speed
Pin Material
Standard 6000 Oxide ceramic Ø 5.2 mm

Spare Pins
Order Code Line Speed
Pin Material
R50012 6000 Oxide ceramic

Complete Kit
The DX2FP Tension Meter is supplied as a complete kit including meter and instruction manual in a foam-fitted hard-plastic carrying case. NIST-Traceable Calibration Certificate & Test Report is optionally available.

Accuracy± 1% of full scale or
± 1 graduation mark on scale
Diameter of Scale41 mm
Maximum Speed6000 m/min
Roller MaterialOxide ceramic Ø 5.2 mm
Housing MaterialDie-cast aluminum
Dimensions225 x 90 x 44 mm
(8.6" x 3.5" x 1.7")

Request offer
Checkline Europe
Your information request is sent!
We'll contact you as soon as possible.