We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

ZX-6 Dakota Thru-Paint Ultrasonic Wall Thickness Gauge


Made in the USAThe new Dakota ZX-6 Wall Thickness Gauge can be operated in E-E Mode (Thru-Paint Mode) so that the coating of the material to be measured is eliminated from the reading and the the thickness of the metal wall is indicated.

Total Measuring Range:

Pulse-Echo Mode

(Pit & Flaw Detection) - PE Mode

0.63 to 914.4 mm

Echo-Echo Mode (Through Paint & Coatings) - EE Mode

2.54 to 25.40 mm

(Acutal range depends upon probe selected) - five probes to choose from.

Measuring Range on Steel (with standard T-102-2700 probe):

Pit Flaw Detection)- PE Mode

1.00 to 199.9mm

(Through Paint & Coatings) - EE Mode

2.54 to 25.40mm

The following hi-damped dual-element transducers have been specifically developped for use in E-E Thru-Paint Mode: T-101-2700, 3/16" Diameter, 5.0 MHz Hi-damped transducer for thru paint measurement

T-101-3700, 3/16"Diameter, 7.5 MHz Hi-damped transducer for thru paint measurement

T-102-2700, 1/4"Diameter, 5.0 MHz Hi-Damped transducer for thru paint measurement - Standard Probe

T-102-3700, 1/4"Diameter, 7.5 MHz Hi-Damped Transducer for thru paint measurement

T-104-2700, 1/2"Diameter, 5.0 MHz Hi-Damped Transducer for thru paint measurement

T-104-9700, 1/2"Diameter, 3.5 MHz Hi-Damped transducer for thru paint


Features
  • Measurement range(depending on material and probe): Pulse-Echo Mode (Pit & Flaw Detection) 0.63 to 914.4 mm/ Echo-Echo Mode (Through Paint & Coatings) /2.54 to 25.40 mm
  • Resolution of 0.01 mm
  • Measuring unit switchable between mm and inch
  • Selectable Backlight ON/OFF/AUTO
  • Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
  • The probe is waterproof and can be submerged in water
  • Includes NIST Traceable Calibration Certificate
  • 5 Year Warranty

Additional functions:

Zeroing:
Automatic or manual zeroing of the probe.

Probe diameter:
Specify the probe diameter for increased linearity.

Differential mode:
Returns the ± difference from an entered nominal value.

Velocity Settings:Adjustable on keypad

Alarm Mode:
Adjustable maximum and minimum limits. Exceeding the limit warns a visual and audible alarm.


Measuring Limits
Minimum Radius for Convex Surfaces Minimum Radius for Convex Surfaces 8.89 mm
Minimum Radius for Concave Surfaces 76.2 mm
Minimum Radius for Concave Surfaces Minimum Headroom 25.0 mm
Minimum Sample Diameter Minimum Sample Diameter 3.8 mm
Minimum Substrate Thickness - F Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na

Complete Kit
The ZX-6 is supplied as a complete kit in a in a foam-fitted carrying case, including:
gauge
  • probe
  • 120 ml bottle of coupling fluid
  • 2 AA batteries
  • NIST-Traceable Calibration Certificate
  • Operating Instruction Manual


Accesories

A-302-6002 A-302-6002 protective cover for TI series



More details

A-302-6002 A-302-6002 protective cover for TI series 127313

Category Wall Thickness Gauge


More details

Category  Wall Thickness Gauge 753

Specifications
Measuring Range on Steel (with standard T-102-2700 probe): Pulse-Echo Mode (Pit & Flaw Detection) - PE Mode 1.00 to 199.9mm Echo-Echo Mode (Through Paint & Coatings) - EE Mode 2.54 to 25.40 mm (range depends upon probe selected) - five probes to choose from
Resolution: 0.01 mm
Measuring Mode: Pulse-Echo (P-E), Echo-Echo (E-E, Thru-Paint Mode), Scan, Differential, Alarm and VX-velocity
Velocity Range: 305 to 18,542 meters/sec
Probe (standard): 1/4", 5 MHz Hi-Damp Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2700
Probes (optional): 1 to 10 MHz, 3/16" up to 1 inch (custom probes available)
LCD Display: Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes
Display Update Rate: 10 Hz (10 updates/sec)
Pulse Repetition Frequency (PRF) 200 Hz (200 pulses/sec)
Temperature Limits: Ambient: -30 to 75° C Material: -20 to 100° C
Housing Rating: IP65
Housing: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Cable: 1.2m waterproof cable with non-polarized, quick-disconnect connectors
Certification: NIST Traceable
Dimensions: 63.5 x 131.3 x 31.5 mm
Battery Type: 2x AA batteries (rechargeable batteries can be used)
Battery Life: 45h continuous use
Weight: 308 grams
Guarantee: Gauge: 5 Years Probes: 90 Days

Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!