The Dakota ZX-1 ultrasound wall thickness gauge is typically deployed for the measurement of wall thickness and the degree of corrosion on different types of materials and is particularly suitable for tests on one type of material.
This convenient and easy to use ultrasound wall thickness gauge can be deployed for the inspection of pipes and comes with a single velocity setting enabling an immeditate testing.
The total measuring range (depending on material and probe type) ranges from 0.63 to 914.4 mm and on steel (with standard T-102-2000 probe) from 1,00 to 199,9 mm.
Velocity range (velocity through a given material) setting:
0.0120 - 0.7300 inches/μs and from
For calibration on a wide range of materials:
305 - 18,542 meters/s
The preset speed value lock avoids unintentional changes to settings.The whole is rounded up with a limited warranty of 5 years on the gauge.
Automatic or manual zeroing of the probe.
Specify the probe diameter for increased linearity.
Returns the ± difference from an entered nominal value.
Velocity Settings: Adjustable on keypad
Adjustable maximum and minimum limits. Exceeding the limit warns a visual and audible alarm.
Automatically determines the correct speed of sound from a calibration on 2 samples of known thickness.
|Minimum Radius for Convex Surfaces||8.89 mm|
|Minimum Radius for Concave Surfaces||76.2 mm|
|Minimum Headroom||25.0 mm|
|Minimum Sample Diameter||3.8 mm|
|Minimum Substrate Thickness - F||na|
|Minimum Substrate Thickness - NFe||na|
|Total Measuring Range:||0.63 - 914.4 mm(depending on material and probe type)|
|Measuring Range (Steel):||1.00-199.9 mm (with standard probe T-102-2000)|
|Measuring Mode:||Pulse-Echo (P-E)|
|Velocity Range:||305 to 18,542 meters/sec|
|Probe (Standard):||1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000|
|Probes (optional):||1 to 10 MHz, 3/16" up to 1 inch (custom probes available)|
|Cable:||1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors|
|Display:||Large LCD display with 4.5 digits each 1.3 cm high -Adjustable backlight |
-Division into individual segments to ensure clear reproduction of advanced information
|Display refresh rate:||10 Hz (10 updates/sec)|
|Temp. Limits:||Ambient: -30 to 75° C Material: -20 to 100° C High temperature probes available|
|Battery Type:||2x AA batteries (rechargeable batteries can be used)|
|Battery Life:||45 hours continuous use|
|Housing:||Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)|
|Pulse Repetition Frequency (PRF):||200 Hz (200 pulses/sec)|
|Dimensions:||63.5 x 131.3 x 31.5 mm|
|Warranty:||Device: 5 Years Probes: 90 Days|