We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

PZX-7DL Precision Ultrasonic Wall Thickness Gauge with Data memory & USB Output


The PZX-7DL precision ultrasonic wall thickness gauge offers  the same features as the PZX-7 combined wit additional data memory and USB output connection.

Measurement ranges are as follows:

Range on steel with Standard Delay Line Transducer

0.150 - 25.40 mm

Range with Contact Transducers

up to 923 mm

With the use of a single element delay tip transducer, the PZX-7DL can measure wall thickness of thin materials and automatically remove any coatings in Echo-Echo Mode (E-E). In addition the PZX-7DL can automatically switch to Interface Echo Mode (I-E) when thicker materials are measured. The PZX-7DL also provides the Plastic Mode (PLAS), which in use with the optional Graphite Delay Line Tip id deployed when measuring placstics..

The incorporated data memory has a capacity of 10,000 data values stored in up to 40 data sets with 250 values per set. Data transferral is done via the USB port. A USB cable is delivered with the PZX-7DL and no software is required.


Features
  • Total Measuring Range(Steel): 0.150 - 25.40 mm (depending on transducer/probe type and material)
  • Sequential data storage, 40 files of 250 readings per file, for 10,000 readings
  • Resolution of 0.001 mm
  • Measuring unit switchable between mm and inch
  • High visibility LCD Display is readable in all lighting conditions and temps as low -30 °C
  • Selectable Backlight ON/OFF/AUTO
  • Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
  • 5 Year Warranty

Delay Line Tips for PZX-7DL


Complete Kit

The PZX-7DL is supplied as a complete kit including:

  • PZX-7DL gauge
  • the standard probe
  • 125 ml bottle of coupling fluid
  • USB-C Data transfer cable
  • 2 AA batteries
  • NIST Traceable Calibration Certificate
  • Manual 


Related Products

TI-007DLX Material thickness gauge ultrasound with data memory


  • 3 exchangeable measurement modes: Pulse-Echo (P-E), Interface-Echo (I-E) and Plastics (PLAS)
  • Resolution of 0.001mm
  • Datenspeicher für 10.000 Messwerte, in 40 Stapeln zu je 250 Messwerten

More details

TI-007DLX Material thickness gauge ultrasound with data memory

TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge


  • Multiple calibration options: One Point, Two Point, or selection from a Material List.
  • 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.
  • Hardware AGC gain control for multiple echo and thru-paint measurement.

More details

TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge

Category Accessories


More details

Category  Accessories Accessories

A-302-6002 A-302-6002 protective cover for TI series



More details

A-302-6002 A-302-6002 protective cover for TI series

Specifications
Total Measuring Range with standard probe on steel: 0.15 - 924 mm
Probe (Standard): 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507)
Probes (optional): Various Single Element Delay Line and Contact Transducers (5 to 20MHz)
Display Backlight: Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options
Operating Temperature: -30 to 75C
Measuring Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX)
Pulse Repetition Frequency (PRF): 200 Hz (200 pulses/sec)
Output: USB single value only (no internal memory)TI-007DLX for a model with build-in memory for 40,000 values USB output
Output Optional: RS-232 and Bluetooth
Display Update Rate: Display Update Rate
Housing: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing Protection: IP65
Battery Type: 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used)
Keypad: Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys
Cable: 1.2 m
Dimensions: 64 x 131 x 32 mm
Certifications: NIST Traceable and MIL-STD-45662A
Warranty: Gauge: 5 Years Probes: 90 Days

Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!