We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

3000EZ-E SERIES Coating Thickness Gauge with External Probe


Made in Germany2 Models Available:
DCF-3000EZ-E - Ferrous Only Model
DCFN-3000EZ-E - Combination Ferrous & Non-Ferrous Model

Range Ferrous: 0-3500 µm (0-140 mils)
Range Non-Ferrous: 0-3000 µm (0-120 mils)

With coating thickness gauges designed for measurement on ferrous metals, non-magnetic coatings such as varnish, paint, enamel, chrome, copper, zinc, etc. can be measured on steel and iron (magnetic induction method).

Coating thickness gauges designed for measurement on non-ferrous metals can measure all electrically insulated coatings such as varnish, paint, anodizing coatings on non-ferrous metals & stainless steel (eddy-current method).

The 3000EZ-E Series Coating Thickness Gauge provides fast, non-destructive, accurate coating measurements on steel and non-ferrous metals. Designed to accommodate a wide range of laboratory and field applications and manufactured to international quality standards, the 3000EZ-E Series will provide years of trouble-free use.


Features
  • Equipped with External Probe
  • External dual sensor with hard metal pole tip
  • Manufacturer's Certificate Included
  • Large back-lit display
  • Live statistics display for up to 99 readings
  • Keypad-selectable English or metric units

Accessories

Cps Certified Shim Set


  • Calibration Foils for Coating Thickness Gauges

More details

Cps Certified Shim Set 126033

Measuring Limits
Minimum Radius for Convex SurfacesMinimum Radius for Convex Surfaces0.2" (5 mm)
Minimum Radius for Concave Surfaces2" (50mm)
Minimum HeadroomMinimum Headroom2" (50 mm)
Minimum Sample DiameterMinimum Sample Diameter 0.4" (10 mm)
Minimum Substrate Thickness - FMinimum Substrate Thickness - F 20 mils (0.5 mm)
Minimum Substrate Thickness - NFe2 mils (50 µm)

Resolution Table
Microns (µm)
0 - 999 µm 1 µm
1.000 - 2.498 mm 0.002 mm
2.500 - 3.500 mm 0.005 mm
 
Mils
0 - 99.9 mils 0.1 mils
100.0 - 140.0 mils 0.2 mils

Specifications
Gauge versions:DCF-3000EZ-E
Coating thickness on ferrous metals
DCFN-3000EZ-E
Coating thickness on ferrous & non-ferrous metals
Range:Ferrous: 0 - 3500 µm (0 - 140.00 mils)
Non-Ferrous: 0 - 3000 µm (0 - 120.00 mils)
Accuracy:3 µm (±0.1 mils) or 3% of reading, whichever is greater
Resolution:Refer to table above
Display:Back-lit, 4-digit alphanumeric
Min. Measuring Area:10 mm x 10 mm (0,4" x 0,4")
Min. Curvature Radius:concave: 50 mm (2")
convex: 5 mm (0.2")
Calibration:Factory calibration, zero calibration
Statistics Program:Number of readings, mean value, standard deviation, maximum and minimum reading of max. 99 readings
Operating Temp:0 °C to 50 °C (32 °F to 122 °F)
Surface Temp:-15 °C to 60 °C (5 °F to 140 °F)
Memory Temp:-20°C to 60 °C
Power:2 AAA, 1.5 V
Dimensions:110 mm x 50 mm x 25 mm (4.3" x 2" x 1")
Weight:90 g (3.2 oz)
Protection Class:IP 52 (proof against dust and dripping water)
Standards:DIN, ISO, ASTM, BS
Warranty:1 year
Calibration CertificateIncluded

Complete Kit
The 3000EZ-E Series is supplied as a complete kit with:
- 3000EZ-E coating thickness gauge
- zero-plate
- plastic test shim
- 2 AA batteries
- soft carrying pouch
- instruction manual
- manufacturer´s certificate

The DCF-3000EZ-E is supplied with a
ferrous zero-plate
The DCFN-3000EZ-E is supplied with a
ferrous and a non-ferrous zero-plate


Related Products

Cic-Coating Calibration Coating Thickness Gauge


  • Easy planning of calibration
  • Short turnaround
  • Possibility to adjust and repair
  • In accordance with DIN EN ISO 2178, 2360, 2808 and meets or exceeds the indicated accuracy.

More details

Cic-Coating Calibration Coating Thickness Gauge

Buy Now
Products

Product
Price
Quantity
126879
DCF-3000EZ-E Coating Thickness Gauge
€ 600,00 
126880
DCFN-3000EZ-E Coating Thickness Gauge
€ 740,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
  Information