Contact
Phone: +44 (0)121 2855 222
Email: info@checkline-europe.co.uk
Interchangeable Probe!
3 Models
DCF-3000PRO - Ferrous Only Model
DCN-3000PRO - Non-Ferrous Only Model
DCFN-3000PRO - Combination Ferrous & Non-Ferrous Model
Measuring Range: 0-1500µm (0-60 mils)
The new Check-Line 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:
The recording and further processing of stored measurement data are just as easy to carry out as the measurement itself. The file names can be alphanumerically assigned via an input panel and managed in a data memory.
Eight (6) separate probes are offered for a wide variety of applications.
The DCFN-3000PRO-90 is a special puprose model coating thickness gauge. It is specially designed for tube ID measurements on iron/steel and non-ferrous metals with a minimum tube thickness of 12 mm.
The DCF-3000PRO-10 is a special puprose model coating thickness gauge. It is specially designed for ID measurements on iron/steel
up to a thickness of 10 mm.
|
Minimum Radius for Convex Surfaces | 0,08" (2 mm) |
| Minimum Radius for Concave Surfaces | 0,2 " (5 mm) | |
 |
Minimum Headroom | 3,5 "(90 mm) |
 |
Minimum Sample Diameter | 5mm x 5mm |
 |
Minimum Substrate Thickness - F | 8 mils (0,2 mm) |
| Minimum Substrate Thickness - NFe | 2 mils (50 µm) |
| Standard probe & and PRO-90° probe | |
|---|---|
| Mils | |
| 0.00 - 9.99 mils | 0.01 mils |
| 10.00 - 24.98 mils | 0.02 mils |
| 25.00 - 49.95 mils | 0.05 mils |
| 50.0 - 99.9 mils | 0.1 mils |
| Microns (µm) | |
| 0.0 - 99.9 µm | 0.1 µm |
| 100.0 - 249.8 µm | 0.2 µm |
| 250.0 - 499.5 µm | 0.5 µm |
| 500 - 999 µm | 1 µm |
| 1.000 - 1.998 mm | 0.002 mm |
| Gauge versions: | DCF-3000PRO: for measurements on iron/steel DCN-3000PRO: for measurements on non-ferrous metals DCFN-3000PRO: for measurements on iron/steel and non-ferrous metals DCFN-3000PRO-90: for tube ID measurements on iron/steel and non-ferrous metals DCF-3000PRO-F10: for measurements on iron/steel up to 10mm |
| Measuring principle: | Magnetic induction method (F-version); Eddy current method (N-version) |
| Measuring range: | 3000PRO & 3000PRO-FN90: 0 - 1500 µm 3000PRO-F10: 0 - 10,000 µm |
| Tolerance: | ± (0.7 µm/0.04 mils + 1% of reading) |
| Resolution: | Refer To Table Above |
| Display: | 4-digit display (digit height 10 mm/0.4”) and 32 alphanumerical characters; switchable backlight |
| Minimum measurement area: | 5 mm x 5mm (0.2” x 0.2”) |
| Minimum curvature radius: | convex 2mm (0.08”) concave 5mm (0.2”) |
| Minimum substrate thickness: | 0.2mm (8 mils) for F-version 50 µm (2 mils) for N-version |
| Calibration methods: | - Factory calibration: no calibration required for standard applications - Zeroing (1-point calibration): measurements on small geometries - Zeroing and foil calibration (2-point calibration): increased measuring accuracy - Two-foil calibration: especially for rough, sand-blasted surfaces - CTC: calibration on coated object if zeroing is not possible - Zero offset: addition/subtraction of a constant value to/from the reading |
| Limit values: | Selectable; optical and acoustic signal if limit value is exceeded |
| Scan mode: | For continuous measurements; for the quick recognition of coating thickness variations; with permanent display of minimum and maximum reading |
| Statistics: | Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings |
| Data memory: | 10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable |
| Interfaces: | Infrared and serial RS232 interface |
| Language: | Operator prompting and documentation in German, English, French (optional other languages) |
| Operating temperature: | 0°C to 50°C / 32°F to 122°F (storage temperature - 20°C to 60°C / -4°F to 140°F) |
| Surface temperature: | -15°C to 60°C / 5°F to 140°F (briefly above 60°C / 140°F up to 150°C / 302°F) |
| Power supply: | 2 x round cell (AA) 1.5 V up to 60 hours of operating time |
| Housing/keypad: | Protection class IP52 (protection against dust and dripping water) |
| Dimensions: | Gauge: 140mm x 62mm x 30mm (5.6” x 2.5” x 1.2”) HxWxD Probe: dia. 14 mm x 83mm (dia. 0.56” x 3.3”) |
| Weight: | approx. 200 g (7 oz) - gauge including batteries and probe |
| Standards: | DIN EN ISO, ASTM, BS |
| Warranty: | 1 year |
The 3000PRO is supplied as a complete that includes:
