Contact
Phone:
+44 (0)121 2855 222
Email :
sales@checkline.eu
Certified coated metal plates are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution.
| Order Code | Ideal for | Coating / Substrate |
|---|---|---|
| S1 |
PosiTector 6000 F, FS, FRS, FN, FNS, FNRS PosiTest F & FM |
Epoxy on Steel (Ferrous) |
| S2 |
PosiTector 6000 F0S, F45S, F90S PosiTest DFT Ferrous & Combo |
|
| S3 |
PosiTest G & GM PosiPen A, B & C |
|
| A1 |
PosiTector 6000 N ,NS, NRS, FN, FNS, FNRS |
Epoxy on Aluminum (Non-Ferrous) |
| A2 |
PosiTector 6000 NAS , N0S, N45S, N90S PosiTest DFT Combo |
|
| A3 | PosiTector 100B, 200, 200B |
| Order Code | Approximate Thickness | Accuracy | |||
|---|---|---|---|---|---|
| Plate 1 | Plate 2 | Plate 3 | Plate 4 | ||
| S1 | 0 |
75 um 3 mils |
250 um 10 mils |
1500 um 60 mils |
± 0.43 um ± 0.017 mil |
| S2 | 0 |
75 um 3 mils |
250 um 10 mils |
1000 um 40 mils |
|
| S3 | 0 |
15 um 0.6 mils |
40 um 1.6 mils |
100 um 4 mils |
|
| A1 | 0 |
75 um 3 mils |
250 um 10 mils |
1500 um 60 mils |
± 0.43 um ± 0.017 mil |
| A2 | 0 |
75 um 3 mils |
250 um 10 mils |
500 um 20 mils |
|
| A3 |
75 um 3 mils |
125 um 5 mils |
250 um 10 mils |
500 um 20 mils |
|
